...
512 per SS7 Channel Group
Related Topics:
IMG 1010 - Configuring SS7 CIC Routing (section "Configuring an ISUP Group")
...
Disable (Default) |
Enable |
See IMG 1010 - Local Number Portability (LNP)
Link OOS Handling:
Disable (Default) - Functionality is same as previous software. If Signaling Link goes Out Of Service, then the associated CIC's will go Out Of Service as well.
Enable - If signaling link goes Out Of Service all associated CIC's which are in the idle state will go Out Of Service. If any CIC's are in either the ringing or connected state the CIC's will not go Out Of Service until a later subsequent condition occurs. See IMG 1010 - SS7 Link OOS Handling for more information on configuration and functionality.
...
The field Transparent ISUP via SIP-T is utilized when messaging is being received via SIP-T on incoming channel group and is being sent out of IMG via an SS7 ISUP Channel group. Before configuring verify that SIP-T is enabled and configured. See SIP Signaling - SIP and SIP Signaling - SIP-T Entity for more information on configuring/enabling SIP-T:
...