IMG 1010 - Translation Entry
...
The next few topics below explain digit translation on the IMG. It is highly recommended that they be read before proceeding on to configuring a Translation Entry
IMG 1010 - Configuring Digit Matching and Translation
Incoming Translation Entry Pane:
...
The digit string mask is compared to each incoming or outgoing number. The digit string mask is used to determine whether the number is a match for the current Translation Table attributes entry. The Digit String Mask supports the use of wild– cards within the string. Below is short explanation on how to use wild– cards in the "String" field. For more information on using wild– cards in the String field see IMG 1010 - Digit Translation Wildcards.
Digits and wild-cards can be used in the string field. The values entered in this field are processed as strings not numbers. Enter values accordingly.
...
If there are any channel groups created this field becomes a drop down menu with all the Channel Groups configured. The IMG supports matching both the incoming string along with the Channel Group. This option is typically used if a channel group uses a specific prefix like 606. The incoming call will be routed to a channel group that only accepts 606 numbers. All other numbers will not be accepted.
For incoming translation tables the match is on the incoming channel group and for outgoing translation tables the match is made on the outgoing channel group.
The selections in the drop down menu are as follows:
...
The value added to the billing number translation field will be included in the Charge Number parameter in the case of an outgoing SS7 call (IAM message) using this translation table. To change the default attributes of the parameter use the IMG 1010 - Advanced Billing Number Translation pane.
Info Digits Translation:
Info Digits are included in the Originating Line Info Parameter (OLIP) in case of an outgoing SS7 call (IAM Message). See IMG 1010 - Advanced Translation Features.
Carrier Number Translation:
The value present will be included in the Transient Network Selection (TNS) parameter in case of an outgoing SS7 call (IAM message) using this translation table. To change the default attributes of the parameter, use the IMG 1010 - Advanced Carrier Number Translation pane.
Re-Run Option:
Valid only if Type of Operation is Translation and String to Match is Dialed Number. Click in the RE-Run option field and a drop down menu will offer the following selections:
...
Select a previously configured Service Route entry to implement Pre-Call Announcements.
See IMG 1010 - Configuring Pre-call Announcements and IMG 1010 - Route Entry