...
Right click on the Dialogic object and select New Profiles. The Profiles object is a parent or container object and no configuration is needed here. Refer to the Profiles topic for more information on this object.
Right click on the Profiles object and select New TDM Profiles. The TDM Profiles object is a container object also and no configuration is needed here. Refer to the TDM Profiles topic for more information on this object.
Right click on the TDM Profiles object and select New T1 or E1 Span Profile. Refer to the T1 Span Profile or E1 Span Profile for more information on configuring the individual fields of these objects.
...
Right click on the IMG 2020 object and select New Facility. Refer to the topic for more information on this object.
Right click on the Facility object and selectNew select New DS-1 Spans. In the object pane that appears, select 0 from drop down menu of the Starting Offset field and select 3 from the drop down menu of the Ending Offset field. This will configure the a range of DS-1's from 0 to 3.
Select from the drop down menu of the Profile Name field the profile configured above. Commit this object. At this point DS-1's 0 through 3 have all been configured with the same span profile. Refer to the object table below which displays this.
...
Right click on the Dialogic object and select New Profiles. The Profiles object is a parent or container object and no configuration is needed here. Refer to the Profiles topic for more information on this object.
Right click on the Profiles object and select New TDM Profiles. The TDM Profiles object is a container object also and no configuration is needed here. Refer to the TDM Profiles topic for more information on this object.
Right click on the TDM Profiles object and select New T1 or E1 Span Profile. Refer to the T1 Span Profile or E1 Span Profile for more information on configuring the individual fields of these objects.
Repeat step 3 and configure 4 separate TDM Profiles and give each profile a different name. In this procedure, the profiles were named E1_Profile_1, E1_Profile_2, E1_Profile_3, and E1_Profile_4.
...