DS-1 Profile Wizard

When linking a T1 or E1 Profile to one or more DS-1 spans, either the same profile can be configured for every DS-1 in the range of DS-1 offsets or a different profile can be linked to each DS-1. The procedures below describe how to configure the same profile on every DS-1 in the range of DS-1's and describes how to configure a different profile for each DS-1. Within the DS-1 object is a Profile Wizard that can be used to achieve this. Also, using the DS-1 Profile Wizard, any DS-1 can have its profile modified at any time. 

Link 1 TDM profile to all five DS-1's configured

The procedure below will configure one TDM Profile and link that one TDM Profile to five DS-1's.

Configure the Profile

• Right click on the Dialogic object and select New Profiles. The Profiles object is a parent or container object and no configuration is needed here. Refer to the Profiles topic for more information on this object.

• Right click on the Profiles object and select New TDM Profiles. The TDM Profiles object is a container object also and no configuration is needed here. Refer to the TDM Profiles topic for more information on this object.

• Right click on the TDM Profiles object and select New T1 or E1 Span Profile. Refer to the T1 Span Profile or E1 Span Profile for more information on configuring the individual fields of these objects.

Configure DS-1's and link profile to all DS-1's

• Right click on the IMG 2020 object and select New Facility. Refer to the topic for more information on this object.

• Right click on the Facility object and select New DS-1 Spans. In the object pane that appears, select 0 from drop down menu of the Starting Offset field and select 3 from the drop down menu of the Ending Offset field. This will configure the a range of DS-1's from 0 to 3.

• Select from the drop down menu of the Profile Name field the profile configured above. Commit this object. At this point DS-1's 0 through 3 have all been configured with the same span profile. Refer to the object table below which displays this.

Open

Link a different profile to each of five DS-1's configured

The procedure below will create five individual TDM Profiles and link each profile to a different DS-1.

Configure the Profiles

• Right click on the Dialogic object and select New Profiles. The Profiles object is a parent or container object and no configuration is needed here. Refer to the Profiles topic for more information on this object.

• Right click on the Profiles object and select New TDM Profiles. The TDM Profiles object is a container object also and no configuration is needed here. Refer to the TDM Profiles topic for more information on this object.

• Right click on the TDM Profiles object and select New T1 or E1 Span Profile. Refer to the T1 Span Profile or E1 Span Profile for more information on configuring the individual fields of these objects.

• Repeat step 3 and configure 4 separate TDM Profiles and give each profile a different name. In this procedure, the profiles were named E1_Profile_1, E1_Profile_2, E1_Profile_3, and E1_Profile_4.

Link a different profile to each DS-1

• Right click on the IMG 2020 object and select New Facility. Refer to the topic for more information on this object.

• Right click on the Facility object and selectNew DS-1 Spans. In the object pane that appears, select 0 from drop down menu of the Starting Offset field and select 3 from the drop down menu of the Ending Offset field.

• In the Profile Name field, select from the drop down menu the profile labeled E1_Profile_1. Once committed, the profile labeled E1 Profile_1 will be configured for each of the DS-1's.

• Go back to the DS-1 Spans object pane and modify the Starting Offset field to display 1 and the Ending Offset to display 1.

• Select from drop down menu of the Profile Name field the profile labeled E1_Profile_2 and commit this.

• Go back to the DS-1 Spans object pane and modify the Starting Offset field to display 2 and the Ending Offset to display 2.

• Select from drop down menu of the Profile Name field the profile labeled E1_Profile_3 and commit this.

• Go back to the DS-1 Spans object pane and modify the Starting Offset field to display 3 and the Ending Offset to display 3.

• Select from drop down menu of the Profile Name field the profile labeled E1_Profile_4 and commit this. At this point DS-1's 0 through 3 have all been configured with a different span profile. Refer to the object table below which displays this.

Open