IMG 1010 - UUI Support - Overview
The IMG supports sending UUI (User to User Information) between called and calling parties. The purpose of the User to User Information support is to pass specific information not pertaining to the call from one user to another. The information can be passed during the following phases of a call.
...
IAM to IAM- The User to User data is initially received in the incoming SS7 IAM message. It is then propagated to the outbound SS7 network using the SS7 IAM message.   |
ANM to ANM- The User to User data is initially received in the incoming ANM message. It is then propagated to the SS7 side and transmitted out using the SS7 IAM message.
 |
...
SAM to IAM- The User to User data is initially received in the incoming SS7 SAM message. It is then propagated to the outbound SS7 network using the SS7 IAM message.
 |
REL to REL- The User to User data is initially received in the incoming SS7 REL message. It is then propagated to the outbound SS7 network using the SS7 REL message.
 
|
Between ISDN and SS7
...
The UUI support is configured on each Channel Group. Under each Channel Group Object in ClientView right click and select New Channel Group.
In the Channel Group pane that appears enter a name for the Channel Group and select ISDN from the drop down menu in the Signaling Type field:
Enter all other network relevant information in this pane and commit this information.
Right click on the Channel Group just created and select "New ISDN Group"
In the ISDN Group pane that appears enter any relevant information such as D channel etc. Commit This:
Right click on the ISDN pane and select "New ISDN Circuits".
In the B Channel Pane that appears select the b channel information and Commit this:
The ISDN Channel group is now configured. In order to configure the UUI support, right click on ISDN Pane and select "New ISDN Parameter Filter".
The following pane will appear.
In this pane you can select whether the User to User information will be passed along by selecting the drop down menu and choosing either Pass or Don't Pass
...
The UUI support is configured on each Channel Group. Under each Channel Group Object in ClientView right click and select New Channel Group.
In the Channel Group Pane that appears enter a name for the Channel Group and select SS7 from the drop down menu in the Signaling Type field.
Enter all other network relevant information in this pane and commit this information.
Right click on the Channel Group just created and select "New ISUP Group"
In the ISUP Pane that appears enter any relevant information such as D channel etc. Commit This:
Right click on the ISUP Pane and select "New Circuits".
In the Circuits Pane that appears configure the CIC information using the drop down menus and Commit this.
The SS7 Channel group is now configured. In order to configure the UUI support, right click on ISUP Pane and select "New ISDN Parameter Filter". The following Pane will appear
In this pane you can select whether the User to User information will be passed along by selecting the drop down menu and choosing either Pass or Don't Pass
...
UUI Support in SIP is configured under the SIP SGP Object in ClientView. Right click on Dialogic IMG EMS and select New Profiles and Commit this
The SIP SGP object needs to be created now. Right click on Profiles object and select New SIP SGP
The default SIP SGP object will be displayed if you would like to make any changes to this screen then change the first field which is the SIP Profile ID field to something other than ID = 0. Once this is accomplished then the rest of the fields can now be changed.
In order to configure the SIP UUI support, right click on the SIP SGP object and select New SIP UUI Support. A screen like below will be displayed.
The User to User Header Field is a drop down menu where UUI Support can be set to either Enable or Disable. If UUI Support is Enabled, a UUI Format field will open up below it and the user can decide whether UUI is transferred using Binary or Hexadecimal. Refer to screen capture below.
The Prot. Discriminator Byte is set to Not Included by default. If User to User is enabled, then decide whether Protocol Discriminator Byte is set to Not Included or Included. Refer to the IMG 1010 - SIP UUI Support topic for more information. Refer to the example in the next section.
...