Facility

The Facility object pane is a container object and no configuration is achieved in this object pane. Once the facility object is created, the TDM DS1's/DS0's and the Packet Facility IP ports can be configured below it. To create the Facility object, right click on the IMG 2020 object and select New Facility. A facility object pane will appear and from this object either TDM DS1's/DS0's or Packet Facility ports can be configured to communicate through the interfaces on the IMG 2020 rear panel. Once the facility object is committed, the Synchronization Mode field will automatically be populated with the type of timing that is being utilized on the TDM DS1's. Refer to information below.

...