Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents
minLevel1
maxLevel6
outlinefalse
stylenone
typelist
printablefalse

Description:

The SS7 signaling object is the first object created when configuring SS7 signaling on the IMG. To configure, right click on the Signaling object and select New SS7. The Redundancy Configuration field within this object will default to Standalone if only one node has been created within the logical node group and SS7 redundancy is not being configured. If SS7 redundancy is going to be configured, and a second IMG node has been created, the Redundancy Configuration field now allows the user the ability to select either Standalone or Primary. If configuring SS7 redundancy, select Primary in this field and in the Peer Logical Node ID field, select the ID of the node that will be the Secondary SS7 node. Once configured, the SS7 object that gets created displays whether SS7 redundancy has been configured and what the peer and secondary node ID's are. The IMG supports creating one SS7 signaling object per node and up to four SS7 stacks can be created under it.

...