...
| Table of Contents | ||
|---|---|---|
|
Description:
This pane defines the configuration for a group of ISUP channels. The contents of the pane will vary depending on whether the associated SS7 Stack configured in the OPC-DPC field is an ANSI, ITU, or JTISUP stack.
...
For information regarding the ISUP Group with an ANSI stack selected in the OPC-DPC field, refer to IMG 1010 - ISUP Group - ANSI
For information regarding the ISUP Group with an ITU / ETSI stack selected in the OPC-DPC field, refer to IMG 1010 - ISUP Group - ITU / ETSI
Accessing this Pane:
Dialogic IMG EMS -> Routing Configuration -> Channel Groups-> Channel Group (SS7) -> ISUP Group
...
512 per SS7 Channel Group
Related Topics:
IMG 1010 - Configuring SS7 CIC Routing (section "Configuring an ISUP Group")
...
The selected option will be removed from the ISUP message. See IMG 1010 - Configuring SIP Privacy
Off (Default) |
Display Only |
Generic Number Only |
Display & Generic Number |
Calling Party Only |
Display and Calling Number |
Calling, Display and Generic |
...
Disable (Default) |
Enable |
See IMG 1010 - Local Number Portability (LNP)
Link OOS Handling:
Disable (Default) - Functionality is same as previous software. If Signaling Link goes Out Of Service, then the associated CIC's will go Out Of Service as well.
Enable - If signaling link goes Out Of Service all associated CIC's which are in the idle state will go Out Of Service. If any CIC's are in either the ringing or connected state the CIC's will not go Out Of Service until a later subsequent condition occurs. See IMG 1010 - SS7 Link OOS Handling for more information on configuration and functionality.
...
JTISUP - CIC mapping will follow JTISUP specifications. Refer to IMG 1010 - JT ISUP CIC Mapping
ISUP - The start and end CIC will map to Span/Channel in a sequential manner not skipping any DS0's.
...