...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Description:
To create a Physical IMG object in ClientView, right click on the Logical IMG and select New Physical IMG. The pane shown below will appear. Physical IMG's in the same Logical IMG do not have to be co-located. Physical IMG's do not have to be configured under a Logical IMG unless SS7 signaling is being configured and the remote nodes will have CIC's confgured on it that will be controlled by the links configured on the Master SS7 node.
...
32 per Logical IMG
Related Topics:
IMG 1010 - Adding a Physical IMG
IMG 1010 - Configuration Wizard
IMG 1010 - Monitoring the IMG Using ClientView
Previous Configuration Required:
In software version 10.3.3 in order to create a Physical Node you must create a Logical Node first. See IMG 1010 - Logical IMG
In software version 10.5.0 if you are configuring SS7 then a Logical node must be created first then Physical Node can be created. If SS7 is not going to be configured then there is no previous configuration and the Physical Node can be configured directly under the Dialogic IMG EMS
...