...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The IMG 2020 supports translating incoming and outgoing translations for the purpose of routing calls. The IMG 2020 supports matching the Dialed,Originating, or Generic Number and translating them into one of the following parameters: Dialed #, Originating #, Billing #, Info Digits, or Carrier #. The Generic Number Translation feature adds the SS7 call message Generic Number Parameter into multiple aspects of the Incoming/Outgoing Translation Table Object. Below describes the functionality of the Generic Number Translation Parameter.
...
The procedure below assumes the basic functionality as well as SS7 signaling has been created and configured. Before proceeding, refer to the Basic Configurations and Configure SS7 topics if this functionality has not been configured.
...
Right click on the Dialogic object and select New Routing Configuration. The Routing Configuration object is a parent or container object and no configuration is needed here. Refer to the Routing Configuration topic for more information on this object.
Right click on Routing Configuration and select New Channel Groups. The Channel Groups object is a parent or container object and no configuration is needed here. Refer to the Channel Groups topic for more information on this object.
Right click on the Channel Groups object and select New Channel Group. A Channel Group object will appear. Either enter a Name that identifies this channel group or accept the default name already entered.
Select SS7_ISUP from drop down menu in the Signaling Type field. Refer to the Channel Group topic for more information on configuring the SS7 Channel Group.
Right click on the Channel Group object created and select New Circuit Group. Select from the drop down menus the Node that the CICs will reside on as well as the Starting and Ending DS-1/DS-0 that the CICs will be configured on. Create as many CIC or Circuit Groups needed.
Once the Channel Group configuration has been achieved, click back onto the Channel Groups object. This object will now display an exclamation point in the icon indicating the configuration has not been sent to the IMG 2020. Click on the Download Resource Table button and the configuration will be sent to the IMG 2020.
...
Right click on Routing Configuration and select New Incoming Translation Tables. A Incoming Translation Tables object will appear. This object is a placeholder for multiple Incoming Translation Tables. No configuration is completed in this object.
Right click on Incoming Translation Tables and select New Translation Table. Enter a name for this translation table. In this example it is labeled Inc_TT1.
Right click on the translation table object just created and select New Translation Element. In the object that appears select Generic Number from drop down menu in the String to Match field and enter a string to match in the String field. To translate the Generic Number enter a value in the Generic # Translation field. Refer to screen capture below.
...
Refer to the Translation Element - Incoming topic for more information on configuring the Incoming Translation Table Entry.
...
Right click on the Profiles object and select New Translation Profiles. The Translation Profiles object is a parent or container object. No configuration is needed here. Refer to the Translation Profiles topic for more information on this object.
Right click on the Translation Profiles object and select New Translation Profile. Either accept the default Name given to this profile or enter a new name that will identify this profile. In this example the profile was labeled Trans_Profile1_Gen_Num.
Right click on the Translation Profile object and select New Advanced Generic Number Parameter. Configure one or more parameters from this object. Refer to the Advanced Generic Number Translation topic for more information on this object.
Click back onto the Translation Element created earlier. In the Translation Profile field select the Translation Profile created. Refer to screen capture below.
...