Advanced Generic Number Translation

The Generic Number or Generic Address parameter is located in the ISUP messaging and is offered to callers who wish to use a presentation/display number which is different than their main number. The IMG 2020 can be configured so the outgoing information such as Number Qualifier Indicator, Nature of Address, Numbering Plan Indicator, etc can be translated. The settings selected in each of the fields will be included in the Generic Address Parameter if the Generic # Translation field in the Translation Table Element object being configured is populated with an outgoing number. See below.

Web GUI Page

Dialogic > Profiles > Translation Profiles > Translation Profile > New Advanced Generic Number Translation

Maximum Objects

One Advanced Generic Number Translation object per Translation Table Element object.

Related Topics and Dependencies

Before configuring the Advanced Generic Number Translation object, the following parameters in the Translation Element object need to be configured for the Advanced Translation to be applied.

  • The Type of Operation field in the Translation Element object must be set to Translation.

  • The String To Match field in the Translation Element object needs to be configured for the parameter to be translated.

  • The String field below the String to Match field must have the digits to match entered.

Once the Generic # Translation is populated, then all other fields within the Advanced Generic Number Translation object can be modified.

Translation Profiles

Translation Profile

Translation Element - Incoming

Translation Element - Outgoing

Configure Digit Matching and Translation 

Generic Number Translation

Field Descriptions

Number Qualifier Indicator (ITU Only)

The Number Qualifier is used in ITU only. Below are the selections available in the drop down menu. The selections below indicate what to translate the Number Qualifier Indicator Parameter to. (Default - No Translation)

ID

Translation

xxxx xxxx

No Translation

000

Reserved – Dialed Digits

001

Additional Called Number

002

Reserved – Supplemental User Provided Calling Number – Failed Network

003

Reserved – Supplemental User Provided Calling Number – Not Screened

004

Reserved – Redirecting Terminating Number

005

Additional Connected Number

006

Additional Calling Party Number

007

Reserved – Additional Original Called Number

008

Reserved – Additional Redirecting Number

009

Reserved – Additional Redirection Number

010

Reserved – Used in 1992 Version

011 - 0127

Unknown NQI

0128 - 254

Reserved – National Use

Nature of Address

Specifies the way in which a number is characterized to an SS7 network for call setup. This field indicates what to translate the Nature Of Address parameter to. (Default - No Translation)

ID

Translation

xxx

No Translation

000

Reserved

001

Subscriber Number

002

Unknown - National Use

003

National Number

004

International Number

005

Network Specific Number

006-112

Unknown NOA

113

Subscriber Number - Operator Requested

114

National Number - Operator Requested

115

International Number - Operator Requested

116

No Number Present - Operator Requested

117

No Number Present - Cut Through

118

905 Call

119

Test Call

120-127

Unknown NOA 

Numbering Plan

Specifies the numbering plan to which a number conforms. This field indicates what to translate the Numbering Plan parameter to. (Default - No Translation)

ID

Translation

xxx

No Translation

000

Unknown

001

ISDN/Telephony

002

Unknown

003

Data Numbering Plan

004

Telex Numbering Plan

005

Private Numbering Plan

006-007

Unknown

008

National Standard Numbering Plan

009

Private Numbering Plan 

Numbering Incomplete Indicator (ITU Only)

The Numbering InComplete Indicator is used in ITU only. Below are the selections available in the drop down menu. The selections below indicate what to translate the Number Qualifier Incomplete  Indicator Parameter to. (Default - No Translation)

ID

Translation

xxx

No Translation

000

Number is complete

001

Number is incomplete 

Screening Indicator (ITU Only)

The Screening Indicator is used in ITU only. Information sent to indicate whether the number information was provided by the user or the network (e.g. automatically generated by the network). Screening Indicator is used only when the Number Qualifier Indicator is configured as Additional Connected Number. Below are selections available in drop down menu. The selections below indicate what to translate the Screening Indicator Parameter to.  (Default - No Translation)

ID

Translation

xxx

No Translation

000

User Provided – Not screened

001

User Provided – Verified and Passed

010

User Provided – Verified and Failed

011

Network Provided 

Presentation Indicator

Information sent to indicate that the calling party number is not to be presented to a public telephone network user, but can be passed to another public telephone network provider. It may also be used to indicate that the number cannot be ascertained by the network. The selections below indicate what to translate the Presentation Indicator Parameter to.(Default - No Translation)

ID

Translation

xxx

No Translation

000

Presentation Allowed

001

Presentation Restricted

010

Address not Available

011

Spare

 

Return to Documentation Home I Return to Sangoma Support