IP Network Element
A SIP Channel group needs to communicate with remotely located IP devices such as gateways, ENUM servers, or even other interfaces located on the rear of the IMG 2020. The IP Network Element Pane is created under each separate channel group and it is configured so the channel group within the IMG 2020 knows where to send the call. To create the IP Network Element object, right click on the Channel Group object and select New IP Network Element. Within the IP Network Element pane will be a drop down list displaying all gateways, ENUM servers, and IMG 2020's configured. Select which IP Network Element that channel group will communicate with. An IP Network element can be:
...
To configure an IP Network Element other objects must first be configured. First a Packet Facility must be created and configured with an IP address. An IP Network and then IP Address object must then be created. An IP Profile must be configured to be able to communicate over IP. A SIP Profile and then an external gateway must be configured for IMG 2020 to communicate with. Next, a SIP channel group must be configured. Once the SIP Channel group is configured then the IP Network element and Node Association object can be configured. Lastly, the Node Association object can be created to bind the Node, Service IP Address, External Gateway, Channel Group, and Packet Facility together.
Configure SIP (Multiple SIP IP)
SIP Signaling - Node Association
Field Descriptions
IP Network Element
Within this field is a drop-down list of the configured 2020 SBC’s, external gateways, and ENUM servers. Select which Network Element will communicate with the Channel group being configured.
...