...
| Table of Contents | ||
|---|---|---|
|
The T1 Span Profile object creates a profile for a T1 DS-1. There are a total of (84) T1 DS-1's on the IMG 2020 and on the rear of the IMG 2020, each DS-1 needs to have a profile associated with it to identify parameters such as Signaling, Framing, etc. Up to 64 T1 profiles can be configured under the Profiles object. How to configure a profile for each TDM DS-1 is displayed below.
...
| Info |
|---|
If configuring IMG 2020 for T1 or E1, verify the correct Boot Flag parameter is configured in either the dhcpd.conf or bootup.cfg files. |
Field Descriptions
Name
Click in the Profile Name field and enter a name that identifies the T1 Profile being created. A table of valid characters that can be used in the naming of each profile can be found in the Valid Characters topic.
Framing
T1 Framing accepts inputs from 24 different sources, converts each individual source into Pulse Coded Modulated bytes and Time Division multiplexes the samples over a four wire facility. The two types of framing are D4 and ESF. Select which framing format will be configured in this T1 profile.
...