M3UA Remote Application Server (AS) Bind
Used when configuring a stack as a Signaling Gateway and the stack being created will connect to a remote Application Server (AS). Once the M3UA Remote Application Server and sigtran links/associations are configured under the Signaling Gateway stack, the next step would be to bind a Remote Application Server (AS) to this Signaling Gateway Stack. The Remote Application Server (AS) Bind object is created to accomplish this. To bind the Remote Application Server and sigtran links/associations to the Signaling Gateway stack, right click on the Remote AS object created under the Signaling Gateway Stack and select New M3UA Remote AS Bind. Within the Remote AS Bind object, select the Sigtran Link that will be used. See below for more information.
...
Dialogic > SS7 > SS7 Network > SS7 Stack (SG Mode) > Remote AS > New M3UA Remote AS Bind
...
Maximum Objects
Up to eight Remote Application Server (AS) Bind objects per IMG 2020. These objects can be spread over multiple SS7 Stacks configured as Signaling Gateways.
...
Before configuring the M3UA Remote AS Bind, M3UA stack configured as a Signaling Gateway, the sigtran links/associations and the Remote Application server objects must first be configured. Once configured they can be bound using the M3UA Remote AS Bind. Refer to the Configure IMG 2020 as SG Server for more information on configuring M3UA functionality.
Links to M3UA Application Server Topics
Configure IMG 2020 as SG Server
M3UA Remote Application Server (AS)
M3UA Remote Application Server (AS) Bind
M3UA Remote Application Server (AS)
M3UA Subsystem Number AS Route
Links to M3UA Signaling Gateway Topics
Configure IMG 2020 as AS Server
M3UA Remote Signaling Gateway - SG
Field Descriptions
Sigtran Link
...
Select from drop down menu whether the sigtran link/association and stack are created on the Primary Signaling Gateway or the Secondary Signaling Gateway. If configuring with a Standalone M3UA system and redundancy is not configured, then the only selection in this field will be Primary.
Forward to SS7 Destination
When Enabled, messages received on the Sigtran link, such as GSM-MAP can be forwarded on the SS7 Destination on MTP3.
Default is Disabled.