...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Introduction
All the latest NSG (Dated : 17 March 2015 onwards) releases's WebGUI will have General Section within Configuration Menu as present at Side Vertical Menu i.e. NSG-GUI -> Configuration -> General in order to configure general parameters for Driver/SIP/ISUP as shown below:
...
Select General option from side/top Configuration Menu (NSG-GUI -> Configuration -> General)
Then change Hardware port RJ45 option as present within Driver header to LINEAR/DEFAULT as shown in the below image and then select save configuration.
NOTE: This configuration is only applicable for A108 cards
...
Select General option from side/top Configuration Menu (NSG-GUI -> Configuration -> General)
Then change SIP-X Header option present within SIP header to Enable/Disable as shown in the below image below and then select save configuration.
ISUP Configuration
...
Select General option from side/top Configuration Menu (NSG-GUI -> Configuration -> General)
Then change ISUP User Message Priority option present within ISUP header to Default/All-zeros/All-ones as per requirement and then select save configuration.
How to Configure Automatic Congestion Control via WebGUI?
...