Overview

The Sangoma EXP100 Expansion Module is used to extend the functionality of Sangoma Phones by providing programmable hard keys to be used for things like BLF (Busy Lamp Field), speed-dial, call transfer, extensions..etc. This allows users to deliver single-button access to contacts / extension. The EXP100 can be physically attached to the Sangoma phone, standalone beside the phone or wall mounted.  Connect up to 6 EXP100s to add up to 240 programmable keys (up to 50 can be BLFs).  

Supported Phones

The EXP100 Expansion Module is supported on Sangoma S500 and S700 IP Phones.

Included Contents

Expansion Module	Connecting Sheet with Screws	Stand
Ethernet Cable	Power Connector	Power Adaptor (Sold Separately)

Physical Overview

Front

1. Hard Keys: 20 programmable with dual-colour display

2. LCD Display: Graphical Backlit (320 x 160 pixels)

3. Dedicated page keys: Navigate between 2 pages

...

1. Certification Sticker

2. Stand mounting point - 5 possible positions

3. Power connector (DC 5 V) - Connect power supply and/or power connector cable

4. 1 x Uplink Port - To connect EXP100 to Host phone using supplied Ethernet cable

5. 1 x Downlink Port - To connect multiple EXP100 modules

6. 4x screw holes - To connect EXP100 to Host phone using sheet connector

Installation

The following Instructions illustrate how to mount the EXP100 directly to the Sangoma Phone.

...

...

Configuration

The below instructions detail how to configure the EXP100 expansion module for use with your Sangoma IP Phone

...