Declaration of Conformity

Declaration of Conformity Certificate

Approvals

Approval Certificate

SIP / H.323 Dual boot operation

Guide on how to select H.323 or SIP operation at initial power on

Safety and Compliance Information

Safety and Compliance Information for all Vega gateway installs

SIP Quick Start Guide

Quick Config guide for R8.1 and later

Quick SIP Config Reference

Quick Config User Manual for R8.1 and later

R7 H323 with Gatekeeper

Configuring Vega 400, H323, release 7

R8 SIP With Proxy and Standalone

Configuring the Vega 400 in release 8

R7 SIP With Proxy and Standalone

Configuring the Vega 400 in release 7

R2MFC configuration

How to configure E1 Vega gateways to support R2MFC and how to take traces of R2MFC call tones and line signalling

E1 / T1 connection Checklist

Steps to ensure that an E1 / T1 Vega gateway is configured to connect to the network correctly

Microsoft OCS

Guides to using Vega gateways with Microsoft OCS

Telecount Radius Server

A guide to using the Telecount Radius server to collect Radius billing info

CISCO AS5300 / Vega Guide

How to configure Release 4, 5 and 6 Vega gateways and Cisco AS5300s to interoperate

BroadSoft with Vega 400

Guide to configuration of, and interoperation of Vega with BroadWorks R11.1

Vega 400 LAN configuration

How to configure the two LAN interfaces on the Vega 400 for single and dual LAN interface operation

Vega between PBX and ISDN

Configuration parameters to allow an ISDN Vega to transparently pass calls between its two ISDN trunks

Rack Mount Instructions

How to use the rack mount brackets provided to install the Vega in a 19inch rack

Introduction to Vega Dial Plans

How to write dial plans to route, authenticate and apply number translation to incoming calls before onward routing

Vega Provisioning

How to Configure Vega Provisioning