10.5.3_SP9 - An Overview of Features
F-5636 Translation of Screening and Presentation Indicators in Calling Party Number
Brief Description:
Feature F-5636 gives a user the ability to decide whether the screening indicator and presentation indicator will be passed through to the SS7 IAM Calling Party number unchanged or passed through with overridden values that are configured through the Advanced Originating Number Parameter object. The feature is supported only when SIP Privacy is enabled and a call is received by the IMG from the SIP network and is transmitted to the SS7 network. Because the feature modifies the behavior of the IMG, a field has been added that can disable or enable the new functionality. The default setting in the ClientView GUI is Disable which forces the IMG to interwork the parameters as it did before the feature was introduced. Refer to the links below for more information regarding this feature.
Related Topics:
IMG 1010 - Translate SI and PI - SIP to SS7
IMG 1010 - Advanced Originating Number Parameters
F-5737 Redirecting Number Translation
Brief Description:
The SIP Diversion Header currently supports interworking the Nature Of Address (noa) parameter from the SIP Diversion Header to the SS7 Redirecting and Original Called Number. Feature F-5737 adds the opposite functionality. Software version 10.5.3 SP9 now supports interworking the Redirecting Number and/or Original Called Number from the SS7 ISUP side into the SIP Diversion Header in the SIP INVITE message. Refer to the links below for more information.
Related Topics:
IMG 1010 - SIP Diversion Header
F-6041 Interworking Diagnostics Indicator between Release-Reason and ISUP
Brief Description:
The SS7 REL message is very general. The release of a call could be for a number of different reasons. The release messages on the SIP side such as BYE, and CANCEL try to narrow down the reason a call was released but in some instances does not give enough information. Feature F-6041 interworks the diagnostics field information that is embedded in the REL message on the SS7 side and inputs them into the Reason Header's release-extension field on the SIP side. The feature is enabled or disabled through a field in the SIP_SS7 Interworking object. Refer to the links below
Related Topics:
IMG 1010 - SS7 Diagnostic byte to Reason Header IW
IMG 1010 - Interworking from SIP to ISUP
F-6073 Map single Diversion Header to both Redirecting and Original Called Number
Brief Description:
When the IMG receives a single Diversion Header on the SIP side, it will map the number in the SIP Diversion Header to both the Redirecting and Original Called Number on the SS7 side. The functionality added does not need to be configured other than setting the Diversion Support field in the SIP Headers object to Diversion. If however, the Original Called or Redirecting Number is not needed on the SS7 side, it can be filtered by setting the Original Called Number or Redirecting Number field in the IMG 1010 - SS7 Parameter Filter object to Don't Pass.
Related Topics:
IMG 1010 - SIP Diversion Header
IMG 1010 - SS7 Parameter Filter
F-6082 RADIUS Optimization
Brief Description:
Feature F-6082 RADIUS optimization adds a new VSA to the RADIUS Access request message sent to the remote RADIUS server. The new VSA being added is labeled Dialogic-Called-Number-NOA and is the Nature of Address parameter of the Called Party Number present on an incoming call. When a call comes into the IMG Gateway the Called Party Number NOA present in the incoming call is added to the RADIUS access message when pre-paid support is enabled. Refer to the links below for more information.
Related Topics:
IMG 1010 - RADIUS - Pre Paid Application
IMG 1010 - RADIUS - Dialogic VSA's
F-6108 CPC interworking SIP to SS7
Brief Description:
Prior to software 10.5.3_SP9 the Unmapped Values in the SIP ISUP CPC Mapping object were interworked from SS7 to SIP only. Feature F-6108 now inter-works the Unmapped values from SIP to SS7 as well. Refer to the topics in the links below
Related Topics:
IMG 1010 - SIP ISUP CPC Mapping (10.5.1_ER1 and above)
F-6109 Make NFS Timer configurable
Brief Description:
The NFS Timeout field is used to configure the amount of time it takes the IMG to mount the NFS server to start downloading the files the IMG is requesting. Depending on the network type, the time it takes to mount the NFS server could vary. Refer to the links in the Related Topics section below for configuration information