Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

IMG 1010 - Validating Your Configuration

Overview:

Use the Validation Report utility to confirm that your configuration does not contain any errors that may prohibit proper operation. Analyze the report for possible errors found and modify your configuration accordingly.

Related Topics:

IMG 1010 - Sample Validation Report

Running a Validation Report:

To validate your configuration, in the configuration tree right-click Dialogic IMG EMS and select Validation Report.

Report Location:

The resulting validation report is stored at the following location:

/opt/dialogic/IMG/reports  Software Versions 10.5.1+

/opt/cantata/IMG/reports  Software Versions 10.3.x - 10.5.0

Report Filename:

ValidationReport_YYYY.MM.DD.HH.MM.SS.txt

Report Contents:

The report includes three sections:

  • Section 1: High Probability of an error

  • Section 2: Possible Error

  • Section 3: Informational

In each section, there are a number of possible error conditions listed. If the condition exists in your configuration, there will be a subentry indicating the source of the error. (See IMG 1010 - Sample Validation Report)

  • No labels