Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

IMG 1010 - Configuring an External SIP Gateway

Use this pane to configure External SIP Gateways from which the IMG may receive calls. To configure a group of gateways, use the Gateway Mask field to validate a range of IP addresses.

  • Right-click External Elements and select New External Gateways.

  • Right-click External Gateways and select New External Gateway. The IMG 1010 - External Gateway pane appears.

  • In the Gateway Signaling Protocol field select SIP.

  • In the Gateway IP Address, enter the IP address of the gateway.

  • In the Gateway Transport Type field, select either UDP, TCP, or TLS.

Refer to IMG 1010 - External Gateway (section "Gateway Transport Type") for more information.

  • Change the Gateway Remote Port if required. Default = 5060.

  • If Gateway Registration is required, change the Gateway Registration field to Yes. Default = No.

  • To validate a range of IP addresses for multiple gateways, use the Gateway Mask field.

  • Use the Trusted and Privacy fields to configure SIP Privacy. See IMG 1010 - Configuring SIP Privacy for more information.

See the  IMG 1010 - External Gateway pane reference for details.

  • No labels

Return to Documentation Home I Return to Sangoma Support