Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

IMG 1010 - Redundant Data

The following illustration shows the cabling for redundant DATA.

 

  • The DATA0 and DATA1 ports are used for communication between the IMG 1010 and the IP network.

  • Ethernet Ports DATA0 and DATA1 are used for RTP streams.

  • Ethernet Ports DATA0 and DATA1 can also be used for SIP or H323 signaling.

  • VOIP Module 0 and Module 1 send RTP to and from the Ethernet DATA Ports within the IMG 1010

  • An IP address shared by DATA0 and DATA1 for redundancy is configured in ClientView.

  • No labels

Return to Documentation Home I Return to Sangoma Support