IMG 1010 - RADIUS - Termination-Action
Radius Attribute: Termination-Action
As per RFC2865:
This Attribute indicates what action the NAS should take when the specified service is completed. It is only used in Access-Accept packets.
A summary of the Termination-Action Attribute format is shown below. The fields are transmitted from left to right.
Type (IETF Attribute Number) - 29 for Termination-Action.
Length - 6
Value - The Value field is four octets.
0 | Default |
1 | RADIUS-Request |
If the Value is set to RADIUS-Request, upon termination of the specified service the NAS MAY send a new Access-Request to the RADIUS server, including the State attribute if any.