Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Preparing CONSOLE Mode Installation...
===============================================================================
ClientView                        (created with InstallAnywhere by Macrovision)
-----------------------------------------
===============================================================================
Introduction
------
InstallAnywhere will guide you through the installation of ClientView
10.5.0.180.
It is strongly recommended that you quit all programs before continuing with
this installation.
Respond to each prompt to proceed to the next step in the installation.  If you
want to change something on a previous step, type 'back'.
You may cancel this installation at any time by typing 'quit'.
PRESS <ENTER> TO CONTINUE:
 
===============================================================================
Pre-Installation Summary
------------
Please Review the Following Before Continuing:
Product Name:
    ClientView
Install Folder:
    /opt/cantata
Link Folder:
    /tmp/install.dir.10340/Do_Not_Install
Product Components:
    ClientView
Disk Space Information (for Installation Target):
    Required:  237,300,497 bytes
    Available: 18,319,400,960 bytes
PRESS <ENTER> TO CONTINUE:
 
===============================================================================
Installing...
-------
[==================|==================|==================|==================]
[------------------|------------------|------------------|------------------]
===============================================================================
Please Review
-------
Congratulations. ClientView has been successfully installed to:
/opt/cantata
************************************
This installation has set some environment variables in /etc/profile. These
variables are not set in this window or any other windows opened prior to
installing the User Interfaces.  For this installation to work properly, these
variables must be set.
These variables include the following:
SK_PRODUCT - to determine which Cantata product is running
SK_PRODUCT_HELP - to determine which Cantata help should be used
PATH - to find the correct version of JAVA
************************************
************************************
To properly run this product, you must
LOG OUT AND BACK IN
to set up your environment.
************************************
************************************
Press "Enter" to quit the installer.
PRESS <ENTER> TO CONTINUE:
[root@kthomas ftpBuilds]#