IMG 1010 - Filter/Timer Configure
Description:
Use this pane to adjust CAS trunk and line signaling filters and timers. Typically this is only required when the trunk or line that the IMG is connected to is not operating to line interface specifications. All timers and filters are set to default values based on industry specifications when the channel trunk type is configured.
Accessing this Pane:
Dialogic IMG EMS -> Signaling -> <Variant Name> -> Filter/Timer Configure
Maximum Objects:
No Limit
Previous Configuration Required:
Related Topics:
Filter / Timer Pane (T1): (E1 shown below)
Field Descriptions:
PPL Filter/Timer Type:
In CAS the only selection is Generic Protocol Timer.
PPL Filter/Timer Selection (T1):
Below is a table which displays the Filter Timer Type along with the PPL number and selections for reference.
PPL Filter Type | PPL Filter/Timer Number | PPL Filter/Timer Selection | E&M | FXS Loopstart |
Generic Protocol Timer | 0x01 | Preseize | 10 |
|
| 0x02 | Inseize | 15 | 20 |
| 0x03 | Modified Incoming Release | 70 | 70 |
| 0x04 | Modified Outgoing Release | 70 | 70 |
| 0x05 | Normal Incoming Release | 70 | 70 |
| 0x06 | Normal Incoming Release with Flash | 102 | 102 |
| 0x07 | Normal Outgoing Release | 70 | 60 |
| 0x08 | Normal Outgoing Release with Flash | 102 | 102 |
| 0x09 | Post Inseize Acknowledgement |
|
|
| 0x0a | Outseize Acknowledgement | 10 | 10 |
| 0x0b | Outseize Answer | 35 |
|
| 0x0c | Outseize Dial Signal End | 4 |
|
| 0x0d | First Release | 70 | 15 |
| 0xe | ANI Request Off-Hook | 20 |
|
| 0x15 | Inseize Complete |
|
|
| 0x16 | Post Inseize Complete |
|
|
| 0x17 | Start Normal Outgoing Release | 0 |
|
| 0x18 | Start Normal Incoming Release | 0 |
|
| 0x19 | Outseize Acknowledgement | 500 | 64,0000 |
| 0x1a | Outseize Answer | 10,000 |
|
| 0x1b | Guard Timeout | 70 | 32,000 |
| 0x1c | Release | 32,000 |
|
| 0x1d | Glare Detection | 10 | 30 |
| 0x1e | Minimum Flash | 30 | 100 |
| 0x1f | Maximum Flash | 100 |
|
| 0x20 | Start Dial Minimum Wink | 10 |
|
| 0x21 | Start Dial Maximum Wink | 35 |
|
| 0x22 | Minimum Delay Dial Signal | 14 |
|
| 0x23 | Maximum Delay Dial Signal | 400 |
|
| 0x24 | Post Start Dial Signal Outpulse Delay | 8 |
|
| 0x25 | Wink 2 Minimum Receive Duration | 10 |
|
| 0x26 | Wink 2 Maximum Receive Duration | 50 |
|
| 0x27 | Wink 2 Minimum Post Outpulse Delay | 10 |
|
| 0x28 | Wink 2 Maximum Post Outpulse Delay | 350 |
|
| 0x29 | Wink 2 Maximum Receive Detection | 1,150 |
|
| 0x2a | Wink 3 Minimum Receive Duration | 10 |
|
| 0x2b | Wink 3 Maximum Receive Duration | 60 |
|
| 0x2c | Wink 3 Minimum Post Outpulse Delay | 10 |
|
| 0x2d | Wink 3 Maximum Post Outpulse Delay | 350 |
|
| 0x2e | Wink 3 Maximum Receive Duration | 400 |
|
| 0x2f | Wink 4 Minimum Receive Duration | 10 |
|
| 0x30 | Wink 4 Maximum Receive Duration | 35 |
|
| 0x31 | Wink 4 Minimum Post Outpulse Delay | 10 |
|
| 0x32 | Wink 4 Maximum Post Outpulse Delay | 350 |
|
| 0x33 | Wink 4 Maximum Receive Detection | 400 |
|
| 0x34 | Wink 5 Minimum Receive Duration | 10 |
|
| 0x35 | Wink 5 Maximum Receive Duration | 35 |
|
| 0x36 | Wink 5 Minimum Post Outpulse Delay | 10 |
|
| 0x37 | Wink 5 Maximum Post Outpulse Delay | 350 |
|
| 0x38 | Wink 5 Maximum Receive Detection | 400 |
|
| 0x39 | Wink 6 Minimum Receive Duration | 10 |
|
| 0x3a | Wink 6 Maximum Receive Duration | 35 |
|
| 0x3b | Wink 6 Minimum Post Outpulse Delay | 10 |
|
| 0x3c | Wink 6 Maximum Post Outpulse Delay | 350 |
|
| 0x3d | Wink 6 Maximum Receive Duration | 400 |
|
| 0x3e | Wink 7 Minimum Receive Duration | 10 |
|
| 0x3f | Wink 7 Maximum Receive Duration | 35 |
|
| 0x40 | Wink 7 Minimum Post Outpulse Delay | 10 |
|
| 0x41 | Wink 7 Maximum Pulse Outpulse Delay | 350 |
|
| 0x42 | Wink 7 Maximum Receive Detection | 400 |
|
| 0x43 | Wink 8 Minimum Receive Duration | 10 |
|
| 0x44 | Wink 8 Maximum Receive Duration | 35 |
|
| 0x45 | Wink 8 Minimum Post Outpulse Delay | 10 |
|
| 0x46 | Wink 8 Maximum Post Outpulse Delay | 350 |
|
| 0x47 | Wink 8 Maximum Receive Detection | 400 |
|
| 0x48 | Post ANI Off Hook Outpulse Delay | 100 |
|
| 0x49 | Maximum Receive ANI Off Hook Request Detection | 1600 |
|
| 0x4a | Maximum Receive Dial Tone Detection | 800 | 800 |
| 0x4b | MFR1 Minimum Receive KP Duration | 5 | 5 |
| 0x4c | MFR1 Minimum Receive Digit Duration | 3 | 3 |
| 0x4d | MFR1 Maximum Receive KP Duration | 1000 | 1000 |
| 0x4e | MFR1 Minimum Receive Inter-Digit Duration | 3 | 3 |
| 0x4f | MFR1 Maximum Receive Inter-Digit Duration | 1000 | 1000 |
| 0x50 | DTMF Maximum Receive 1st Digit Detection | 2000 | 2000 |
| 0x51 | DTMF Minimum Receive Digit Duration | 4 | 4 |
| 0x52 | DTMF Minimum Receive Inter-Digit Duration | 4 | 4 |
| 0x53 | DTMF Maximum Receive Inter-Digit Duration | 2000 | 2000 |
| 0x5b | Wink Duration | 20 |
|
| 0x5c | Flash Duration | 60 | 60 |
| 0x5d | Primary Outseize Signal |
|
|
| 0x5e | Outseize Signaling Complete | 30 |
|
| 0x5f | Delay Dial Signal Start | 7 |
|
| 0x60 | Fixed Pause | 7 |
|
| 0x61 | Timed Answer |
|
|
| 0x62 | Ringing ON Duration |
| 200 |
| 0x63 | Ringing OFF Duration |
| 400 |
| 0x64 | Wink 1 Minimum Transmit Delay | 8 |
|
| 0x65 | Wink 2 Minimum Transmit Delay | 30 |
|
| 0x66 | Wink 2 Maximum Transmit Delay | 1150 |
|
| 0x67 | Wink 2 Transmit Duration | 20 |
|
| 0x68 | Wink 3 Minimum Transmit Delay | 10 |
|
| 0x69 | Wink 3 Maximum Transmit Delay | 40 |
|
| 0x6a | Wink 3 Transmit Duration | 20 |
|
| 0x6b | Wink 4 Minimum Transmit Delay | 8 |
|
| 0x6c | Wink 4 Maximum Transmit Delay | 40 |
|
| 0x6d | Wink 4 Transmit Duration | 20 |
|
| 0x6e | Wink 5 Minimum Transmit Delay | 8 |
|
| 0x6f | Wink 5 Maximum Transmit Delay | 40 |
|
| 0x70 | Wink 5 Transmit Duration | 20 |
|
| 0x71 | Wink 6 Minimum Transmit Delay | 8 |
|
| 0x72 | Wink 6 Maximum Transmit Delay | 40 |
|
| 0x73 | Wink 6 Transmit Duration | 20 |
|
| 0x74 | Wink 7 Minimum Transmit Delay | 8 |
|
| 0x75 | Wink 7 Maximum Transmit Delay | 40 |
|
| 0x76 | Wink 7 Transmit Duration | 20 |
|
| 0x77 | Wink 8 Minimum Transmit Delay | 8 |
|
| 0x78 | Wink 8 Maximum Transmit Delay | 40 |
|
| 0x79 | Wink 8 Transmit Duration | 20 |
|
| 0x7a | MFR1 Transmit KP Duration | 10 | 10 |
| 0x7b | MFR1 Transmit Digit Duration | 6 | 6 |
| 0x7c | MFR1 Transmit Inter-Digit Duration | 6 | 6 |
| 0x7d | DTMF Transmit Digit Duration | 6 | 6 |
| 0x7e | DTMF MFR1 Transmit Inter-Digit Duration | 6 | 6 |
PPL Filter/Timer Value.
Each PPL Filter/Timer Selection can be modified. Click in the PPL Filter/Timer Value field and the following popup will appear. Enter a value which will be in milliseconds
Filter / Timer Pane (E1):
PPL Filter/Timer Type:
Select from a drop down menu one of the following:
Generic Protocol Timer |
R2 Signaling Timer |
DTMF Signaling Timer |
MFR1 Signaling Timer |
PPL Filter/Timer Selection (E1):
Below is a table which displays the Filter Timer Type along with the PPL number and selections for reference.
PPL Filter Type | PPL Filter/Timer Number | PPL Filter/Timer Selection | Value (ms) |
Generic Protocol Timer | 0x01 | Incoming Layer 4 Busy Out Acknowledge Wait | 400 |
| 0x02 | Incoming Stage 1 Fwd digit receive wait | 2000 |
| 0x03 | Incoming Stage 2 Fwd digit receive wait | 2000 |
| 0x04 | Incoming Stage 3 Fwd digit receive wait | 2000 |
| 0x05 | Incoming Stage 4 Fwd digit receive wait | 2000 |
| 0x06 | Layer 4 Connect Wait | 24,000 |
| 0x07 | Layer 4 Wait | 400 |
| 0x08 | Clear Forward | 1500 |
| 0x09 | Incoming Stage 2 Initial Fwd digit receive wait | 2000 |
| 0x0a | Incoming Stage 1 Initial Fwd digit receive wait | 2000 |
| 0x0b | Incoming Stage 4 Initial Fwd digit receive wait | 2000 |
| 0x0c | Incoming Stage 3 Initial Fwd digit receive wait | 2000 |
| 0x0d | Layer 3 Circuit Release Wait | 10 |
| 0xe | Layer 3 Circuit Release Wait | 10 |
| 0x0f | Host Control Wait | 6000 |
| 0x10 | Layer 3 Connect Wait | 24,000 |
| 0x11 | Seize Acknowledge Wait | 400 |
| 0x12 | Wait to transmit after receiving Glare | 10 |
| 0x13 | Wait to look for transmitted idle after detecting glare | 10 |
| 0x14 | Outgoing Stage 1 BWD R2 signal wait | 1500 |
| 0x15 | Outgoing Stage 1 Initial BWD R2 signal wait | 1500 |
| 0x16 | Outgoing Stage 2 BWD R2 signal wait | 1500 |
| 0x17 | Outgoing Stage 2 Initial BWD R2 signal wait | 1500 |
| 0x18 | Outgoing Stage 3 BWD R2 signal wait | 1500 |
| 0x19 | Outgoing Stage 3 Initial BWD R2 signal wait | 1500 |
| 0x1a | Outgoing Stage 4 BWD R2 signal wait | 1500 |
| 0x1b | Outgoing Stage 4 Initial BWD R2 signal wait | 1500 |
| 0x1c | Outgoing wait for answer | 24,000 |
| 0x1d | Outgoing Layer 4 clear wait | 400 |
| 0x1e | Outgoing Idle line signal wait | 12,000 |
| 0x1f | Outgoing Idle line signal wait after glare detected | 12,000 |
| 0x20 | Host Control Wait | 24,000 |
| 0x21 | Wait for clear wait after glare detected | 1000 |
| 0x22 | Receive Line signaling filter | 4 |
| 0x24 | Incoming BWD R2 cycle complete event wait | 400 |
| 0x26 | Wait for idle after invalid line signal during FWD R2 digit | 2000 |
| 0x27 | Layer 3 Clear Forward | 300 |
| 0x28 | Wait after stage 1 FWD digits Outgoing Stage 1 BWD A | 2000 |
| 0x29 | Compelled/Indefinite inpulsing FWD R2 digits received | 20 |
| 0x2b | Cycle complete event wait | 200 |
| 0x2d | Wait for next BWD R2 signal after outpulse stage 3 digits | 2000 |
|
|
|
|
R2 Signaling Timer | 0x01 | Pulse Duration (15) |
|
| 0x02 | Pulse Delay (15) |
|
| 0x03 | Minimum Valid Duration (7) |
|
| 0x04 | Minimum Tone State Change |
|
|
|
|
|
DTMF Signaling Timer | 0x01 | DTMF Transmit Digit Duration (6) |
|
| 0x02 | DTMF Transmit Inter-Digit Duration (6) |
|
| 0x03 | DTMF Maximum Receive 1st digit detect (2000) |
|
| 0x04 | DTMF Maximum Receive Inter Digit Timeout (2000) |
|
| 0x05 | DTMF Minimum Receive 1st digit detect (2000) |
|
| 0x06 | DTMF Minimum Receive Inter Digit Timeout (2000) |
|
|
|
|
|
MFR1 Signaling Timer | 0x01 | MFR1 Transmit KP Duration (6) |
|
| 0x02 | MFR1 Transmit Digit Duration (6) |
|
| 0x03 | MFR1 Transmit Inter-Digit Duration (6) |
|
| 0x04 | MFR1 Minimum Receive KP Duration (5) |
|
| 0x05 | MFR1 Minimum Receive Digit Duration (3) |
|
| 0x06 | MFR1 Maximum Receive KP Duration (1000) |
|
| 0x07 | MFR1 Minimum Receive Inter-DigitTimeout (3) |
|
| 0x08 | MFR1 Maximum Receive Inter-DigitTimeout (3) |
|
PPL Filter/Timer Value:
Each PPL Filter/Timer Selection can be modified. Click in the PPL Filter/Timer Value field and the following pop-up will appear. Enter a value which will be in milliseconds
