Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

SS7 - CIC

The SS7 CIC object allows a user to both monitor and provision either an individual CIC or a Range of CIC's. To open and display the SS7 CIC object, click on one of the CIC's displayed in the Object Table Tab of the Circuit Group object (Created under the SS7 Channel Group). This will display the individual CIC along with a set of provisioning buttons. The same set of buttons can also be accessed by right clicking on an individual CIC that is displayed under the object table tab. See information below.

There are two separate SS7 Circuit Group objects that are created when configuring SS7 CICs. The first is created under the SS7 stack and the second is created under the SS7 Channel Group. The SS7 Circuit Group allows a user the ability to click on each of the individual CICs in the object table. When clicking on each individual CIC, this opens up the SS7 CIC object which displays the state of the CIC that is being viewed. When viewing the SS7 CIC object that is created under the SS7 stack object the object pane displayed will look like the first screen capture below. When viewing the SS7 CIC object created under the Channel Group, the object pane displayed will look like the second screen capture below.

Web GUI Page

Dialogic> SS7 > SS7 Stack > SS7 Destination > SS7 ISUP Group > Circuits > Select CIC in object table

 

Dialogic > Routing Configuration > Channel Groups > Channel Group > Circuits > Select CIC in object table

 

Maximum Objects

One SS7 CIC object for each CIC displayed in the Object table of the Circuit Group object.

Related Topics and Dependencies

The SS7 CIC monitoring/provisioning object displays the status of each individual CIC in the object table. The status of each individual CIC can be viewed from within the object table of the Circuit Group object configured under the SS7 Channel Group.

IMG 1010 - Provisioning CICs 

Field Descriptions

CIC ID (Under Signaling only)

Displays the ID of the CIC selected from the object table

Span Name

Displays the DS-1 selected  from the object table

Channel Name

Displays the DS-0 selected from the object table.

SS7 CIC Service State

Displays the service state of the CIC selected. (In Service, Out of Service, Answered)

SS7 CIC State

Displays the CIC state of the CIC selected. (Idle, Locally Unequipped)

SS7 CIC Block State

Displays whether the CIC selected is in the blocked state. Calls will not be processed on a CIC in the blocked state.

SS7 Manual COT Result

Displays the latest manual COT result or the the latest Out Continuity Check result, if configured in the SS7 Group.

Buttons (Under Channel Group only)

In Service - Bring a CIC into service from an Out of Service State.

Out Of Service - Take a CIC Out of Service.

Maintenance Block- Initiate a Maintenance Block on a specific CIC or range of CIC's. Calls will not be processed on a CIC put into Maintenance Block Mode. Any calls that are on that circuit will be brought to an idle state gracefully. Any calls on that CIC will be allowed to continue until call is released.

Maintenance Unblock - Unblock a CIC or range of CIC's from the Maintenance Block state

Reset - Reset a CIC.

Circuit Query Message - Send a CQM (Circuit Query Message) to query for the CIC state. The CQM (Circuit Query Message) and CQR (Circuit Query Request) messages are printed in Call Tracing. The Circuit Query Message can query one CIC at a time but cannot query a range of CICs. Below is screen capture of what is printed in Call Trace when invoking the Circuit Query Message.

Continuity Check Request - To initiate a Continuity Check on a CIC or a group of CICs, right click on the CICs entry and select Continuity Check Request. The results will appear in the Manual COT Result column (Start, Start NACK, Success, Failure) and in Call Trace log. Below is screen capture displaying what is printed in the Call Trace when invoking the COT test.

COT cannot be performed on JT-ISUP CICs.

Graceful Out Of Service - Bring CIC or range of CIC's Out of Service Gracefully. Allow any calls to be released before bringing CIC to an idle state.

  • No labels