Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Audio Issues

  1. Enable recording as shown at 

NCA - Call Recording

  1. Enable General Logging as shown below.

General Logging

In order to properly troubleshoot an NCA issue please follow the 4 steps below to increase logging and gather audio recordings:

  1. Enable NCA Logging

 by setting the "DEVELOPMENT default loggers" section as uncommented (remove the hashes).

Also, disable the "PRODUCTION default logger" by commenting out (add hashes) the 'log4cplus.rootLogger='  line in the following 2 files:

/config/call-analyzer-logging.properties
/config/call-analyzer-engine-logging.properties

The changed configuration in both files should look as follows:

# Logger severity overrides

log4cplus.logger.netborder.sip.message=DEBUG
log4cplus.logger.netborder.cpa=DEBUG

#DEVELOPMENT default loggers configuration. Use in DEVELOPMENT stage to ease troubleshooting
# Use either this or the one below
log4cplus.rootLogger=WARN, SYSTEMLOG_APPENDER, DEBUG_APPENDER, CALL_LOG_APPENDER
 
# PRODUCTION default logger configuration. Optimized for speed and long term maintenance.
# Avoid large files and big amount of files.
# Use either this or the one above
#log4cplus.rootLogger=WARN, SYSTEMLOG_APPENDER, PRODUCTION_APPENDER 

 

NOTE*:
For major issues, please also modify the default log-level settings in each of the previous files from "INFO" to "DEBUG" so that we are able to capture as much information as possible.

  1. Enable call-recording

 by modifying line 22 of call-analyzer-engine.properties to equal "true".

The changed config file should look as follows:

# recorder settings 
netborder.cpa.runtime.recordAudio=true 
netborder.recorder.outputDirectory=logs/call-logs 
netborder.recorder.outputDirectory.dateTime=true

 

  1. Restart NCA

 : the service MUST be restarted in order to apply the changes.

  1. Reproduce the exact issue

 you are facing by making 5-10 calls that demonstrate the problem.  If possible, make 5-10 calls that do not experience the issue as well so we can more easily distinguish the exact issue you are facing.
Once the logs have been generated, zip up and send us the following folders:

  • /log/

  • /config/

  • If you are on a Linux system please also include /var/log/messages

  1. Upload your logs 

:

Please ensure that the 'call-logs' directory has been created under the /log/ directory after making the changes above.  
There should be a csv file alongside a multitude of logs sets which correspond to distinct calls made in step

  1. These logs should be organized in a hierarchical date/time directory structure.

  • No labels

Return to Documentation Home I Return to Sangoma Support