Set Up e911

• Once your system has been set up after purchase and you log into the PBXact Cloud Store, you will need to set up E911.
  

• You will notice a warning that you need to set up e911.  Until you do so, you will not be able to do anything else with your PBXact Cloud Location.  

  • Press the red Add E911 Address button as shown below:

    

• Provide the physical address that you want us to register anytime someone dials 911 from your main number.  Your primary number is shown at the top of the form.

  • You can change which number is your primary DID from the Numbers section.

• Press Save E911 when done.
   

  

• You can now log into your PBX Admin and set up your PBX.