You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Current »
Start WAN Link
|
Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 Configuring interfaces: w1g1 w1g1chdl done. |
Status WAN Link (Layer 1/Layer 2)
cat /proc/net/wanrouter/interfaces
|
Interface name | Device name | Media | Operational State | w1g1 | wanpipe1 | 0 | Connected | w1g1chdl | w1g1 | 0 | Connected | |
Layer 1 - w1g1
Layer 2 - w1g1chdl
Test WAN Link
|
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.639 ms 64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.364 ms 64 bytes from 10.0.0.2: icmp_seq=3 ttl=64 time=0.333 ms 64 bytes from 10.0.0.2: icmp_seq=4 ttl=64 time=0.340 ms 64 bytes from 10.0.0.2: icmp_seq=5 ttl=64 time=0.378 ms --- 10.0.0.2 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4350ms rtt min/avg/max/mdev = 0.333/0.410/0.639/0.118 ms |
10.0.0.2 - IP Address of ISP Router
Stop WAN Link
|
Shutting down wanpipe1 interface: w1g1 Shutting down wanpipe1 interface: w1g1chdl Shutting down device: wanpipe1 No devices running, Unloading Modules |