Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Vega 3000G High Density Analog

View Data sheet


The Vega 3000G analog media telephony gateway is designed to simplify the integration of legacy phone systems to IP infrastructure. The Vega 3000G connects analog handsets & devices to an IP network, typically either an Internet Telephony Service Provider (ITSP) or a corporate network.

Vega 3000G analog media gateways are available with 24 FXS ports, for connection to standard analog telephones.

Enhanced Network Proxy

This option enables continuity of service during WAN/SIP outage and may be configured to operate in a number of ways including:

  • Standalone proxy

  • IP devicesurvivability

  • IP device call routing

  • Emergency call routing

  • SIP to SIP call routing

Open,Non-ProprietaryInterfaces

All Vega gateways support SIP and T.38 fax.

The gateway can be configured for different country requirements, such as tones and line impedance.

All Vega gateways have proven interoperability with a wide range of existing telecommunications & VoIP equipment.

Density

With up to 24 FXS ports in a chassis that is only 1U-high and half a rack deep, these gateways provide exceptional density.

 

Enterprise Applications:

  • Enterprise VoIP networking

  • Compatibility of legacy phones with IP-PBX and UC platforms

  • Enterprise IP telephony gateway

 

Service Provider Applications:

  • Connect analog phones tohostedtelephony platforms

  • Low-density PSTN gateway

  • Survivabilityfor IP phone

 

Interfaces

VoIP

  • SIP

  • Audio codecs:

    • G.711 (a-law/µ-law)

    • G.729a

    • G.723.1 (5.3/6.4 kbps)

    • G.726

    • Clearmode

    • GSM

  • FAX Support – up to G3 FAX, using T.38

  • Modem Support – up to V.90, using G.711

  • Up to 24 VoIP channels

  • Telephony Interfaces

  • 24 ports per RJ-21 connector

  • 600R, 900R or CTR-21 line impedance

LAN Interfaces

1 RJ-45, 1000BaseT/100 BaseTx/10 BaseT, full/half duplex

USB Interfaces

  • 1 USB 2.0 for extra storage

Features

Telephony Features

  • Call Waiting

  • CallForward– Unconditional, Busy, No-Answer

  • Call Transfer – Blind, Consultative

  • 3-Way Conference

  • Do Not Disturb

  • Message Waiting Indicator – Audible, Visual

  • Music on Hold

  • Executive Barge

  • Caller ID presentation – UK, DTMF, Bellcore GR30, ETSI

  • Caller ID screening

  • SIP registration & digest authentication

Operations, Maintenance & Billing:

  • HTTP(S) web server

  • RADIUS accounting & login

  • Remote firmware upgrade:

    • Auto code upgrade

    • Auto configurationupgrade

  • SNMP V1, V2 & V3

  • Syslog

  • TFTP/FTP support

  • VT100 – RS232/Telnet/SSH

  • Voicereadbackof IP parameters

Routing & Numbering

  • Dial planner – sophisticated call routing capabilities, standalone or gatekeeper/proxy integration

  • Direct Dialing In (DDI)

  • SIP registration to multiple proxies

Call Quality

  • Adaptive jitter removal

  • Comfort noise generation

  • Silence suppression

  • 802.1p/Q VLAN tagging

  • Differentiated Services (DiffServ)

  • Type of Service (ToS)

  • QoS statistics reporting

  • Echo cancellation (G.168 up to 128ms)

Security & Encryption

  • Media – SRTP (Optional)

  • SIP – TLS (Optional)

  • Management – HTTPS, SSH Telnet

  • Configurable user login passwords

  • Enhanced Network Proxy (ENP)

Hardware

Certification

  • EMC (Class B)

    • EN55022

    • EN55024

    • FCC Part 15

    • AS/NZS3548

  • Safety

    • EN60950

    • IEC60950

    • UL60950

    • AS/NZS60950

  • Telecoms

    • E1: TBR4

    • T1: FCC Part 68

    • T1: CS-03

    • VCCI

FXS Line Length:

  • Up to 8km at 1 REN, depending on environment

Environmental

  • 0°..40°C

  • 0%..90% humidity (non–condensing)

Indicators

LED:

  • System: Power/System Ready/Activity

  • LAN: Speed/Activity

Dimensions

  • 1U: 270mm (W) x 155mm (D) x 43mm (H)

  • Weight: 1.5kgs (3.31lbs)

  • Rackmount ears supplied: 107mm (2 pieces)

Power

  • External AC adapter

  • 100–240 VAC (50/60 Hz)

  • DC output 12V/5A (60W)

Program Storage

  • Code & configuration data are stored in FLASH & executed from RAM

  • No labels