IMG 1010 - Configuring Route Lists

Before you begin:

Channel Groups must be created before creating route lists. When creating the Channels groups, do not select a Route Table in the Channel Group yet. At the end of this procedure we will return to the Channel Group Pane and assign Route Tables to channel groups. See related topic for links to creating channel groups

IMPORTANT NOTE:

There are a couple ways to download a route list. Below are the two methods.

A Route List will not get sent to the IMG until you click the Save Route List button shown below. Selecting the commit option does not download the table. After the Route List has been modified, click Save Route List button.

OR

In ClientView if you are editing a route list both that object and the parent object will have a cached icon. You can continue to make changes to the table without downloading the list to the IMG. When done with all of the edits select an object outside of the parent object and the list will get downloaded.

Route List Pane in software version 10.5.0 - 10.5.1_ER2

Route List Pane in software version 10.5.1_ER3+

Procedure:

Right-click Routing Configuration and select New Route List.
Right-click Route List and select New Route List.
The Route List ID is automatically populated with the next available number.
Enter a Name for the route list. Using mouse, double click in the Name field and box will change to white. Enter a name to give this route list
Select from drop down menu the Hunting Option to be used.
To disable Re-routing select Disabled from drop down menu. For more information on configuring the Route List Pane, see IMG 1010 - Route List

Adding Channel Groups to a Route List:

Right-click the Route List entry and select New Channel Group. The Channel Group (in Route List) pane appears, see IMG 1010 - Channel Group - Route List Entry
Select the Channel Group to add to this Route List from the Group Name field. The router hunts through the channel groups in a sequence that is based on the hunting option that you specified above.
To add additional Channel Groups, repeat steps 6 and 7 for each. See IMG 1010 - Channel Group - Route List Entry for details.

Assigning Route Lists to a Route Table:

From the list of Route Tables you have created, right-click the desired Route Table and select New Route List.
In the Routing Action Type field, select Route List.
In the Route List field, select this Route List.

Assigning a Route Table to Channel Group

Return to the Channel Group and select the Route Table from the drop-down list in the Route Table field.

See IMG 1010 - Configuring H.323 Routing or IMG 1010 - Configuring SS7 CIC Routing