IMG 1010 - ClientView Menus

1 File Menu:
2 Edit Menu:
3 View Menu:
4 Communications Menu:
5 Tools Menu:
6 Help: (Software versions 10.5.0 and 10.5.1)
7 Help: (Software versions 10.5.2 and beyond)

File Menu:

Open and Commit Configuration File- Opens a configuration (.csa) file. When Open and Commit Configuration File is chosen, a "Select Configuration File" pop-up screen will appear. Select from a list of .csa files in the menu. The selected .csa file will open in ClientView and then will be sent to the IMG. If there is already a file open in ClientView and a different .csa file needs to be loaded, you must close ClientView and GCEMS and then reopen them both. From here select 'open a new configuration' and a screen with all .csa files will appear. Select which .csa file you would like to open. The Open and Commit Configuration File menu will open a .csa file only if there is no system.cfg file or it is forced to save the old system.cfg and create a new one as explained above.

Save Configuration File- Save the .csa configuration file you are currently working on.

Exit- Exit and Close ClientView

Edit Menu:

Delete Current Object - Delete the object currently selected/highlighted in the Configuration Tree.

Commit Current Object - Once a new object is created it needs to be committed or sent to the IMG. By selecting 'Commit Current Object' the newly created configuration will be sent to IMG to be processed.

Undo Changes - When an object has been created, there are individual fields in each Object Pane that will need to be configured. If a change is made to one or more fields, the option of reverting back to the previous state is given by selecting 'Undo Changes' form the Edit Menu. This will revert the changes made in the ClientView pane back to its previous values.

Once the object is committed, the Undo Changes selection will be grayed out.

View Menu:

Expand Tree- Expand all entries in the Configuration Tree so that all objects and its dependants are displayed.

Collapse Tree- Closes all entries in the Configuration Tree. Only the Top-most "Configuration" object will be displayed.

Show All Descendants- This will expand the selected/highlighted object so that all the descendants/children objects are displayed.

Show Immediate Children- Expand the object tree selected/highlighted one level down.

Extend Next Level- Expands all objects in object tree one more level down.

Collapse Previous- This will collapse the lowest descendant under the object selected.

Toolbars- When Toolbars --> Search is chosen, a separate search toolbar is added to the menu-bar. From this search bar, you can create a search to find a specific object in the tree. See IMG 1010 - ClientView Search Capabilities for more information

Communications Menu:

Log Socket Activity- When Log Socket Activity is checked then all socket activity between GCEMS and IMG will be logged to a log file located named UISocket.log. This file is located at /opt/dialogic/common/log.

Tools Menu:

Auto-Commit- When Auto-Commit is enabled, the entries you made in a pane are automatically saved and downloaded to the IMG once you click on another entry in the Configuration Tree. Auto-Commit is enabled by default and cannot be disabled by the user.

Under certain circumstances involving complex messaging between ClientView and GCEMS, Auto-Commit may be disabled and changes you make will not be automatically sent to the IMG. The fields in the Configuration Pane will be orange if this condition exists, and the box next to the Auto-Commit selection will not be checked. You can re-enable Auto-Commit by selecting Auto-Commit from the Tools menu.

Launch EventView- When Launch EventView is checked, EventView will open if not already opened. When Launch EventView is unchecked, EventView will close. See IMG 1010 - EventView for more information.

Application Properties- When Application Properties is chosen, an 'Application Properties' box will appear. Within this popup screen, properties pertaining to ClientView can be changed. Properties such as where the log files will be sent, which port to use for ftp, which port to use for RMI are just a few of the variables that can be changed. See screen capture below displaying the Application Properties box. See IMG 1010 - ClientView Properties .

User Properties- When the User Properties is chosen, a "User Properties" box appears like displayed below.

Number of Hosts Retained in History - Select from a drop down menu the number (0-9) of Host Name/IP Address entries that will be retained in the 'Client Socket' history buffer used during ClientView login.
Auto-Launch EventView - When this is set to true, EventView will launch each time ClientView is open. When set to false, the user must manually open EventView.
Number of Usernames retained in History- Select from a drop down menu the number (0-9) of Username entries that will be retained in the 'Client Socket' history buffer used during ClientView login.
Filter Alarm Card --> Filter Alarm Span fields- The settings in the fields between Filter Alarm Card and Filter Alarm Span display the choices made on the 'Filtered Tab' of EventView. A setting of true signifies the field is checked and will be displayed in EventView screen. The setting of false signifies the field is unchecked and will not be displayed in the EventView screen.

Validation Report- To validate that the configuration doesn't contain any errors, run the Validation Report. See for more information.

Create Tree- Automatically create basic objects to begin your configuration. See

Help: (Software versions 10.5.0 and 10.5.1)

Visit Dialogic Corporation Website- Opens the Dialogic website in a browser. (http://www.dialogic.com)

About Dialogic® ClientView- Provides information on Java Heap statistics, ClientView version, Environment Variables, and Object Counts.

Open Help - Opens IMG Webhelp.

Help: (Software versions 10.5.2 and beyond)