/
Dialogic IMG - IMG 1010 - Creating a Channel Group
Dialogic IMG - IMG 1010 - Creating a Channel Group
Right-click Routing Configuration and select New Channel Groups.
Right-click Channel Groups and select New Channel Group.
In the Name field, enter a name for the channel group.
The ID field is automatically populated with the next available ID. You can change it if you want.
In the Channel Group Function field, select Incoming Trunks, Outgoing Trunks or Incoming/Outgoing Trunks
In the Signaling Type field, select the signaling type.
Select other fields as required.
See IMG 1010 - Channel Group for a description of each field
Do not select a Route Table in the Route Table field at this point. After you configure Route Tables, (see Creating Routing Tables) you come back to the Channel Group pane and associate a Route Table with the channel group.
Related content
Dialogic IMG - IMG 1010 - Configure Channel Groups for IP Phones
Dialogic IMG - IMG 1010 - Configure Channel Groups for IP Phones
More like this
Dialogic IMG - IMG 1010 - Configuring Route Lists
Dialogic IMG - IMG 1010 - Configuring Route Lists
More like this
Dialogic IMG - IMG 1010 - Route List Percentage based routing
Dialogic IMG - IMG 1010 - Route List Percentage based routing
More like this
Dialogic IMG - MG 1010 - Configuring SIP Routing
Dialogic IMG - MG 1010 - Configuring SIP Routing
More like this
Dialogic IMG - IMG 1010 - Configuring ISDN Routing
Dialogic IMG - IMG 1010 - Configuring ISDN Routing
More like this
Dialogic IMG - IMG 1010 - Route Call to a Cause Code
Dialogic IMG - IMG 1010 - Route Call to a Cause Code
More like this