Build: | 118-168 |
Created: | Mon Sep 17 19:20:47 GMT 2018 |
Uploaded: | Mon Sep 17 19:22:53 GMT 2018 |
Status: | final |
Access: | free |
Description |
Sangoma® Diva® System Release 9.6LIN SU5 brings in core Software required for certain affected BRI-2 boards and is a maintenance release that brings support for new Linux distributions with newer Linux kernel versions.
New features of 9.6LIN SU5 are:
Support for the Linux distributions:
RedHat Enterprise Linux and CentOS 7.5
Debian 9.4 (Stretch)
SUSE Linux Enterprise (SLES) 12 SP3
Updated chan_capi and Source rpm in support of FreePBX SNG7 Sangoma distro
Global rebranding to Sangoma Technologies
Diva® System Release 9.6LIN SU4 is a maintenance release that brings support for new Linux distributions and newer Linux kernel versions.
New features of 9.6LIN SU4 are:
Support for the Linux distributions:
RedHat Enterprise Linux and CentOS 7.2
Debian 7.x (Wheezy) and Debian 8.3 (Jessie)
SUSE Linux Enterprise (SLES) 12 SP2
Diva® System Release 9.6LIN SU3 is mainly a maintenance release that includes resolution to a number of field issues with previous versions of the Service Update.
New features of 9.6LIN SU3 are:
Support for the Linux Kernel 3.10
Included Diva SDK 5.5LIN SU 5 runtime libraries
Upgraded Dialogic DSI SS7 Software Development Package (DPK) to version 6.6.11
System Release 9.6LIN SU2 brings in core Software required for certain affected Dialogic® Diva® PCIe Media Boards, due to an application-specific integrated circuit (ASIC) replaced by a field-programmable gate array (FPGA).
System Release 9.6LIN and SU1 combined allow up to eight (8) Dialogic® Diva Media Boards to be installed on a computer running the Linux operating system distributions SuSE, Red Hat, Debian or generic Linux distributions as 32 or 64 bit variant. It supports unified messaging, voice, speech, conferencing applications, RAS & RRAS (client and server mode), modem and fax as well as Voice over IP (VoIP) and Fax over IP (FoIP).
The features of System Release 9.6LIN and SU1 are:
Support for the latest Linux Kernel 3.2
New SIPcontrol version 2.1.5
New softIP version 2.4
DSP enhancements for G.722 (bit order and DTMF processing) and LPCM
DSP enhancements for short burst tone detection used by alarm equipment
Increased Fax stability for V-xPRI Boards
Included Diva SDK 5.5LIN SU 4 runtime libraries
New features for Asterisk (version 1.6 and 1.8) using chan_capi
Support for new HD Audio Codecs (G.722/ISDN, G.722.1) using the V-xPRI Media Boards.
Support for HD Audio IP Conferencing using the chan_capi command "resource" (see also readme.diva.HDAudio).
VIDI Interface for Analog Boards providing an increased performance.
A new WEB based Line Test tool
Improved Call Control statistics
Support of Abandoned calls statistics
Improved the WEB based Board Statistics view (Status->View Report)
Improved the tracing support for History trace, chan_capi trace, custom trace level
Support of new hardware
Dialogic® Blue™ OneSpan-24/30-H-HL Telephony Board
Dialogic® Blue™ TwoSpan-48/60-H-HL Telephony Board
Dialogic® Blue™ FourSpan-96/120-H-HL Telephony Board
Dialogic® Blue™ EightSpan-192/240-H-HL Telephony Board
The new boards mentioned above are equipped with an echo canceller chip for VoIP applications like Asterisk and SIPcontrol. The protocol and media stack software (except echo cancellation) runs on the PC host; the maximal channel density depends on the PC host performance. The Blue-H Board types provide support for all international E1/T1 protocols as offered with E1/T1 Diva Media Boards.
The media stack includes the features sRTP, RTP/RTCP, G.711 Codec (a/ulaw) including CNG and VAD, AGC for conferencing, G.168 Echo Canceller (128 ms echo tail per chip), anti jitter buffer, Line Interconnect (cross board switching and conferencing, Fax tone detection and DTMF detection, full duplex barge-in.
Acronyms (based on the name syntax) are:OneSpan, TwoSpan, FourSpan, EightSpan = Physical number of T1/E1 connectors
24/30, 48/60, 96/120, 192/240 = Number of channels in T1/E1 mode
S, H = (S)oftware echo cancelation or (H)ardware echo cancelation
HL = Half Length PCIe form factor
Miscellaneous:
Support for Asterisk 1.8 and 1.6
Support of Asterisk Management Interface (AMI) enhancements
"CAPI ifcstate" command line support
This command shows the Media Board physical layer status (Alarms, Layer 1/2 state, line errors)"CAPI show channels" command line support
This command shows the individual B-channel status (connection state, bearer protocol, Called/Calling Party Numbers)"CAPI show resources" command line support
This command shows the Media Board resources status (DTMF, Echo Canceller,Noise Suppressor, AGC and Gain)
Display the Board Device Unique ID (DUID) for SS7 in the Diva WEB GUI. An upload option for SS7 licenses is offered now via Diva WEB GUI
Supports Diva Media Boards including the Dialogic® Blue™ OneSpan-24/30-S-LP Telephony Board
Echo canceller up to 256ms tail length for the Dialogic® Diva® V-xPRI Media Boards
Dialogic® Diva® V-xPRI Media Boards can be used as transcoding device in parallel to TDM access (e.g. Asterisk)
Interoperability with OCS 2007 R2 via SIPcontrol 2.1.4
Firmware support of Asymmetric Hold with SIPcontrol (send/receive only)
G.723.1 licensing for the Dialogic® Diva® V-xPRI Media Boards
Performance optimizations for the DMA based Media Streaming Interface
Optimized RTP latency for VoIP applications using Diva Media Boards
Enable access to TSC (Temporary Signaling Connection) for applications
Support of long CAPI Messages and full ISDN Segmented Message
Faster Busy Tone Detector using two cadences
Host based V.23 Modem for softIP (licensed via regular Voice licenses)
Increased channel density for softIP on 64 bit systems
Enabled SIP Header manipulation for softIP via Diva SDK
In addition to RFC2833 support DTMF per SIP-Info for softIP
Enhanced license options for combination of Fax licenses.
Enhanced modulation code to support Bell 103 SIA Modem
Interoperability against a Dialogic® SS7 Signaling Interface Unit (SIU)
Dialogic® Diva® SIPcontrol
SIPcontrol is a feature rich software changing your Diva Board into a VoIP Gateway
Dialogic® Diva® softIP features in Resource Board Mode
When using Diva Media Boards with full DSPs, support of G.729, G.726/32, GSM, iLBC, G.711
Clear Channel Fax and Modem supported up to full speed of 33.6kbps (V.34)
NOTE: The use of G.729 requires the appropriate license from Dialogic
Dialogic® DSI SS7
Provide high performance MTP2 on Diva Media Boards
Run SS7 signaling and media processing on the same Diva Media Board
Supports up to 4 signaling links, up to 4 linksets
Supports Dialogic® DSI SS7 interfaces
Supports CAPI, Diva SDK, TTY and Asterisk via chan_capi
chan_capi configuration wizard for Asterisk®
Automatic generation of a capi.conf file per WEB GUI
Simplified usage of enhanced DSP features with Asterisk®
Support of
256 ms Echo Cancellation
Suppression of ambient noises
Automatic Gain Control
Digital Gain Control
Codec Support (Automatic Transcoding) incl. G.729, G.726/32, GSM, iLBC and G.711
Detection of MF digits and Dialing Pulses Rate conversion (control of recording and playback pitch/speed)
Detection of special tones and human talker interactive control of voice stream
Control voice stream while recording or playing back
Use any available channel command
Conferencing
Using proven Diva Media Board Q.SIG and SS7 implementation
Tone clamping
Automatic Gain Control (Rx, Tx)
Pitch Control (Rx, Tx) in combination with play/record funcionality on Asterisk
MF Tone Detection,
Pulse Dial Detection,
Transmit SIT Tones,
Detect SIT Tones,
Voice Control
DSP-based DTMF detection,
DSP-based echo cancellation,
Chat/Meet Me (Ad Hoc) Conferencing - (MOH).
Fax Send/Receive
Software modules contained in System Release 9.6LIN SU5
Sangoma® Diva® SIPcontrol™ 2.1 SU 5
Sangoma® Diva® softIP 2.4 offers CAPI, TTY, Diva API or Dialplan (chan_capi) based applications to interface with SIP peers.
Sangoma® Diva® softSS7 Software
Dialogic® Diva® Interfaces for support of Dialogic DSI SS7 Software
For more information on software modules please refer to the documentation.
To find out more, please go to Sangoma® Diva® Driver for Linux
Status |
This is a released Product.
Availability |
The Sangoma® Diva® System Release for Linux ("SR") is being provided to you free of charge. However, several of the underlying components of the SR are being licensed or otherwise provided to you under certain terms and conditions that are listed below and that you must accept prior to usage of any of the respective components.
Sangoma® Diva® softSS7™
To operate or otherwise utilize the Diva softSS7 component of the SR, you must (a) purchase the applicable license from a Sangoma or its distributor for your particular geographic region, and (b) agree to be bound by the terms and conditions of the Sangoma license agreement(s) shipped with the Diva softSS7 component of the SR.
Sangoma® Diva® softIP™
To operate or otherwise utilize the Diva softIP component of the SR, you must (a) purchase the applicable license from a Sangoma or its distributor for your particular geographic region, and (b) agree to be bound by the terms and conditions of the Sangoma license agreement(s) shipped with the Diva softIP component of the SR.
Sangoma® Diva® SIPcontrol™
The Diva SIPcontrol component of the SR is available to you at no cost for up to two (2) channel licenses. If more than two (2) channel licenses are required, license packs can be obtained by contacting a Sangoma distributor for your particular geographic region, and which are subject to Sangoma's license agreement(s) shipped with the Diva SIPcontrol product license pack(s).
Sangoma® SR Base Driver
The SR Base Driver component of the SR is available to you at no cost and is distributed, with the exception of the Diva® SDK, under the GNU General Public License (see http://www.gnu.org/licenses/gpl.html ).
For a list of Sangoma local distributors from which you can obtain the applicable license(s) for additional board features, Diva softSS7, Diva softIP, and Diva SIPcontrol, please visit https://www.sangoma.com/find-distributor/ or check with your local sales representative.
Download |
Select the appropriate download from the following list:
Sangoma Diva(R) SR 9.6LIN SU5 LIN - (Diva4Linux_installer_9.6-118-168.bin, 134261kB)
Diva for Linux - Reference Guide:
Release and Installation Notes:
Diva SIPcontrol - Reference Guide:
Diva Interfaces with DSI SS7 - Reference Guide:
DSI SS7 Software for Media Boards - Progammers Guide:
Diva for Linux - Quick Installation Guide and FAQ:
Diva softIP - Reference Guide:
Diva softSS7 for Linux - Reference Guide:
If you have problems: | Contact https://support.sangoma.com |