Operation

wanrouter start

Starting WAN Router...
Loading WAN drivers: wanpipe done.
Starting up device: wanpipe1
Configuring interfaces: w1g1 w1g1chdl
done.

cat /proc/net/wanrouter/interfaces

Interface name | Device name | Media | Operational State |
w1g1 | wanpipe1 | 0 | Connected |
w1g1chdl | w1g1 | 0 | Connected |

ping 10.0.0.2

PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.639 ms
64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.364 ms
64 bytes from 10.0.0.2: icmp_seq=3 ttl=64 time=0.333 ms
64 bytes from 10.0.0.2: icmp_seq=4 ttl=64 time=0.340 ms
64 bytes from 10.0.0.2: icmp_seq=5 ttl=64 time=0.378 ms
--- 10.0.0.2 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4350ms
rtt min/avg/max/mdev = 0.333/0.410/0.639/0.118 ms

wanrouter stop

Shutting down wanpipe1 interface: w1g1
Shutting down wanpipe1 interface: w1g1chdl
Shutting down device: wanpipe1
No devices running, Unloading Modules