IMG 1010 - Configuring IP Bearer Profiles

Owned by Kelli Higdon
Last updated: Mar 04, 2024
1 min read

 

Configure up to 16 IP Bearer Profiles that define the inbound and outbound behavior of a call. Assign IP Bearer Profiles to SIP or H.323 channel groups.

Configure IP Bearer Profiles

  • Right-click IMG EMS and select New IP Bearer Profiles.  

  • Right-click IP Bearer Traffic Profiles and select New IP Bearer Profile.  

  • Complete the fields as described in the IMG 1010 - IP Bearer Profile pane reference.

  • If required, use the Comedia Mode field to enable Comedia. See IMG 1010 - Symmetric NAT Traversal for more information.

Assigning Vocoders to Profile

  • To assign vocoders to the profile, right-click on the profile and select New Supported Vocoders. The Supported Vocoder pane appears (see IMG 1010 - Vocoder Entry).

  • Select the desired vocoder from the Payload Type field and change default payload size settings if required.

IMPORTANT NOTE: You must have your Host Flags set correctly to enable certain vocoders. Additionally, you must have a valid license for AMR and EVRC.

 

The order that the vocoders appear in the table are the order they are used in the H.245 Terminal Capability Exchange or SDP for the IP Bearer Profile. The entries are listed in descending priority. You can change the order using the up and down buttons on the toolbar.  

  • Repeat the two preceding steps to add additional vocoders to the profile.

See the IMG 1010 - Vocoder Entry pane for details.

 

Return to Documentation Home I Return to Sangoma Support