Dialogic IMG - IMG 1010 - Filter/Timer Configure

1 Description:
2 Accessing this Pane:
3 Maximum Objects:
4 Previous Configuration Required:
5 Related Topics:
6 Filter / Timer Pane (T1): (E1 shown below)
7 Field Descriptions:
- 7.1 PPL Filter/Timer Type:
- 7.2 PPL Filter/Timer Selection (T1):
- 7.3 PPL Filter/Timer Value.
8 Filter / Timer Pane (E1):
- 8.1 PPL Filter/Timer Type:
9 PPL Filter/Timer Selection (E1):
- 9.1 PPL Filter/Timer Value:

Description:

Use this pane to adjust CAS trunk and line signaling filters and timers. Typically this is only required when the trunk or line that the IMG is connected to is not operating to line interface specifications. All timers and filters are set to default values based on industry specifications when the channel trunk type is configured.

Accessing this Pane:

Dialogic IMG EMS -> Signaling -> <Variant Name> -> Filter/Timer Configure

Maximum Objects:

No Limit

Previous Configuration Required:

IMG 1010 - Signaling Variant

Filter / Timer Pane (T1): (E1 shown below)

Field Descriptions:

PPL Filter/Timer Type:

In CAS the only selection is Generic Protocol Timer.

PPL Filter/Timer Selection (T1):

Below is a table which displays the Filter Timer Type along with the PPL number and selections for reference.

PPL Filter Type	PPL Filter/Timer Number	PPL Filter/Timer Selection	E&M	FXS Loopstart
Generic Protocol Timer	0x01	Preseize	10
	0x02	Inseize	15	20
	0x03	Modified Incoming Release	70	70
	0x04	Modified Outgoing Release	70	70
	0x05	Normal Incoming Release	70	70
	0x06	Normal Incoming Release with Flash	102	102
	0x07	Normal Outgoing Release	70	60
	0x08	Normal Outgoing Release with Flash	102	102
	0x09	Post Inseize Acknowledgement
	0x0a	Outseize Acknowledgement	10	10
	0x0b	Outseize Answer	35
	0x0c	Outseize Dial Signal End	4
	0x0d	First Release	70	15
	0xe	ANI Request Off-Hook	20
	0x15	Inseize Complete
	0x16	Post Inseize Complete
	0x17	Start Normal Outgoing Release	0
	0x18	Start Normal Incoming Release	0
	0x19	Outseize Acknowledgement	500	64,0000
	0x1a	Outseize Answer	10,000
	0x1b	Guard Timeout	70	32,000
	0x1c	Release	32,000
	0x1d	Glare Detection	10	30
	0x1e	Minimum Flash	30	100
	0x1f	Maximum Flash	100
	0x20	Start Dial Minimum Wink	10
	0x21	Start Dial Maximum Wink	35
	0x22	Minimum Delay Dial Signal	14
	0x23	Maximum Delay Dial Signal	400
	0x24	Post Start Dial Signal Outpulse Delay	8
	0x25	Wink 2 Minimum Receive Duration	10
	0x26	Wink 2 Maximum Receive Duration	50
	0x27	Wink 2 Minimum Post Outpulse Delay	10
	0x28	Wink 2 Maximum Post Outpulse Delay	350
	0x29	Wink 2 Maximum Receive Detection	1,150
	0x2a	Wink 3 Minimum Receive Duration	10
	0x2b	Wink 3 Maximum Receive Duration	60
	0x2c	Wink 3 Minimum Post Outpulse Delay	10
	0x2d	Wink 3 Maximum Post Outpulse Delay	350
	0x2e	Wink 3 Maximum Receive Duration	400
	0x2f	Wink 4 Minimum Receive Duration	10
	0x30	Wink 4 Maximum Receive Duration	35
	0x31	Wink 4 Minimum Post Outpulse Delay	10
	0x32	Wink 4 Maximum Post Outpulse Delay	350
	0x33	Wink 4 Maximum Receive Detection	400
	0x34	Wink 5 Minimum Receive Duration	10
	0x35	Wink 5 Maximum Receive Duration	35
	0x36	Wink 5 Minimum Post Outpulse Delay	10
	0x37	Wink 5 Maximum Post Outpulse Delay	350
	0x38	Wink 5 Maximum Receive Detection	400
	0x39	Wink 6 Minimum Receive Duration	10
	0x3a	Wink 6 Maximum Receive Duration	35
	0x3b	Wink 6 Minimum Post Outpulse Delay	10
	0x3c	Wink 6 Maximum Post Outpulse Delay	350
	0x3d	Wink 6 Maximum Receive Duration	400
	0x3e	Wink 7 Minimum Receive Duration	10
	0x3f	Wink 7 Maximum Receive Duration	35
	0x40	Wink 7 Minimum Post Outpulse Delay	10
	0x41	Wink 7 Maximum Pulse Outpulse Delay	350