SS7 - Destination - ISUP Group - TTC Override

The TTC Override object allows the user to override the TTC parameters in the ISUP IAM, ACM, and CPG message. When the SS7 stack is configured with JTISUPTTC variant, the following TTC parameters are sent by default:

Web GUI Page

Dialogic > SS7 > SS7 Network > SS7 Stack > SS7 Destination > SS7 ISUP Group > New TTC Override

Open

Field Descriptions

IAM TTC Override

Open

Carrier Information Transfer

This field override the value of the 0xF1 TTC parameter sent out in the IAM message.*

Additional User Identification

This field override the value of the 0xF3 TTC parameter sent out in the IAM message.*

Charge Area Information

This field override the value of the 0xFD TTC parameter sent out in the IAM message.*

Reason for no caller ID Interworking

When enabled, this field will send the 0xF5 parameter in the IAM message, when no caller ID is available on the SIP side.*

Reason for no caller ID Value (hex)

This field will contains the value of the 0xF5 parameter when no caller ID is available on the SIP side.*

Generic Parameter 1

This field will contains hexadecimal string of another TTC parameter not listed above.

Format: parameter (0xD7, 0xF0, 0xF2, 0xF4, 0xF6 to 0xFE ), length and value.

Generic Parameter 2

This field will contains hexadecimal string of another TTC parameter not listed above.

Format: parameter (0xD7, 0xF0, 0xF2, 0xF4, 0xF6 to 0xFE ), length and value.

ACM TTC Override

Carrier Information Transfer

This field override the value of the 0xF1 TTC parameter sent out in the ACM message.*

Additional User Identification

This field override the value of the 0xF3 TTC parameter sent out in the ACM message.*

Charge Area Information

This field override the value of the 0xFD TTC parameter sent out in the ACM message.*

Generic Parameter 1

This field will contains hexadecimal string of another TTC parameter not listed above.

Format: parameter (0xD7, 0xF0, 0xF2, 0xF3, 0xF4, 0xF6 to 0xFE ), length and value.

Generic Parameter 2

This field will contains hexadecimal string of another TTC parameter not listed above.

Format: parameter (0xD7, 0xF0, 0xF2, 0xF4, 0xF6 to 0xFE ), length and value.

CPG TTC Override

Carrier Information Transfer

This field override the value of the 0xF1 TTC parameter sent out in the CPG message.*

Generic Parameter 1

This field will contains hexadecimal string of another TTC parameter not listed above.

Format: parameter (0xD7, 0xF0, 0xF2, 0xF4, 0xF6 to 0xFE ), length and value.

Generic Parameter 2

This field will contains hexadecimal string of another TTC parameter not listed above.

Format: parameter (0xD7, 0xF0, 0xF2, 0xF3, 0xF4, 0xF6 to 0xFE ), length and value.