Configuring ISDN protocol for JCT boards in DCM
- Nathaniel Halbrooks
Background
When using Dialogic JCT Media Boards like D/240JCT-1T1, D/300JCT-1E1, D/480JCT-2T1 and D/600JCT-2E1 boards, the name of the ISDN protocol to be selected in the “Interface” tab of the DCM. Moreover, for JCT boards, the ISDN protocol name will vary based on the mode to which the Dialogic board has to be configured (User or Network)
Solution
The below table helps in selecting the proper ISDN protocol to be specified in the "interface" tab when using JCT boards.
Trunk type | ISDN flavor | Mode | ISDN Protocol in JCT | |
1 | E1 | NET5 | User | CTR4 |
2 | E1 | NET5 | Network | NE1 |
3 | E1 | QSIG-E1 | User | QTE |
4 | E1 | QSIG-E1 | Network | QNT |
5 | T1 | QSIG-T1 | User | QTU |
6 | T1 | QSIG-T1 | Network | QTN |
7 | T1 | NI2 | User | NI2 |
8 | T1 | NI2 | Network | NT1 |
9 | T1 | 4ESS | User | 4ESS |
10 | T1 | 4ESS | Network | NT1 |
11 | T1 | 5ESS | User | 5ESS |
12 | T1 | 5ESS | Network | NT1 |
13 | T1 | DMS | User | DMS |
14 | T1 | DMS | Network | NT1 |
For example, if the JCT board has an E1 trunk (D/300JCT-1E1 or D/600JCT-2E1) and it has to be configured as user side of NET5 protocol, CTR4 has to be selected as ISDN Protocol in the Dialogic board.
Product List
Dialogic D/240JCT-1T1, D/300JCT-1E1, D/480JCT-2T1 and D/600JCT-2E1 Media Boards