/
End of Life Products and Features - NBE: Inbound Faxing (DID)

End of Life Products and Features - NBE: Inbound Faxing (DID)

This example shows how to route a call coming in from a PRI/BRI line to a FXS Port. 

  1. Follow the step at Outbound Channel Grouping to assign a group to your FXS port. The best idea is make the group name the same as your DID. In our example we are using group and DID "9054741990 ".

  1. Edit your routing rules "Configuration->Routing Rules" then add the rule below. Ensuring you adjust the DID to your DID number. Also note sometimes the telco just sends the last 4 numbers, so instead of "9054741990 " use "1990". 

 <rule name="FAX-1" outbound_interface="pstn" qvalue="0.1">
   <condition param="transfer" expr="false"/>
   <condition param="pstn.in.channelName" expr=".*"/>
   <condition param="pstn.in.dnis" expr="9054741990"/>
   <condition param="pstn.in.ani" expr="(.*)"/>
   <condition param="pstn.in.callerName" expr="(.*)"/>
   <condition param="pstn.in.ani.presentationIndicator" expr="(allowed|^$)"/>
   <out_leg name="" media_type="sendrecv">
     <param name="pstn.out.channelGroup" expr="9054741990"/>
     <param name="pstn.out.callerName" expr="%1"/>
     <param name="pstn.out.phoneNumber" expr="1"/>
     <param name="pstn.out.ani" expr="%0"/>
   </out_leg>
 </rule>

Related content

End of Life Products and Features - Breaking Off DID's for FXS (FAX) within Express for Lync 2.0
End of Life Products and Features - Breaking Off DID's for FXS (FAX) within Express for Lync 2.0
More like this
End of Life Products and Features - Netborder Routing Examples
End of Life Products and Features - Netborder Routing Examples
More like this
Fonality - Faxing
Fonality - Faxing
More like this
End of Life Products and Features - Outbound Channel Grouping
End of Life Products and Features - Outbound Channel Grouping
More like this
Dialogic IMG - IMG 1010 - Single Number Voice-Fax Routing
Dialogic IMG - IMG 1010 - Single Number Voice-Fax Routing
More like this
Fax Pro
Fax Pro
More like this

Return to Documentation Home I Return to Sangoma Support