End of Life Products and Features - How to enable D-Channel Pcap recordings

 When troubleshooting PRI/BRI connections is it sometimes useful to have a packet capture from the DChannel. The pcap will show you what is happening on the link at a low level during a call. These steps will enable pcap recording on the DChannel.

From the gateway homepage:

1. Click configuration

   Open

   

2. Click PSTN Config
   Expand "Physical Configurations"

   Open

   

3. Select your interface
   Next to "Record To Pcap File" use the dropdown menu to select "Yes". Note: the field below indicates in which file the pcaps will be saved
   Click 'Save'

4. After making your test calls, the pcaps from those calls will be saved in the log (default: /logs/dchan-pcap-recording/)