Asterisk D500 PCI Express Distributed Operation

 

  • The sngtc_server needs to be started before transcoding can be done. Below is the usage of the sng_tc_server_ctrl command. 

--> sngtc_server_ctrl (start|stop|restart)

*Note by default this script is started on system boot. 

  • To enable Asterisk to connect to the sngtc_server and then to the transcoder you will need the have the module codec_sangoma loaded. To load the module run the command below. 

 Asterisk CLI> module load codec_sangoma.so

*Note the step above shows you how to auto load this on Asterisk start.

WARNING: There is a bug in Asterisk that may lead to crashes when loading codecs if there are 2 different modules providing the same translation paths. See this bug report for more information: http://issues.asterisk.org/view.php?id=17092. You can also read the sample configuration comments in sng-tc-<version>/codec/asterisk/sangoma_codec.conf.sample to learn more about work-arounds in case you face the problem.

  • To status the codec_sangoma module use the commands below. 

Asterisk CLI> sangoma show translators(Shows codecs registered by codec_sangoma)  

Asterisk CLI> sangoma show transcoding sessions(Shows active transcoding sessions) 

Asterisk CLI> sangoma show rtp statistics(Shows real time RTP stats including dropped packets)

 

<- back to Asterisk D500 main menu

 

Return to Documentation Home I Return to Sangoma Support