Getting Started

Owned by Kelli Higdon
Last updated: Mar 15, 2024
1 min read

 

Before proceeding with the below information, verify you have purchased an SS7 license from Sangoma in order to deploy your NSG Gateway. Also verify that you have your SS7 Site survey filled out with local and telco specific information in order to configure the NSG Gateway.

 

The following information will guide you through the installation of the basic components of a new NSG deployment.  This will ready the system for SS7 configuration, which is taken care of in the Configuration section. 

Please start with the securing your network section first. Then select either the Appliance Installation section (if you have an NSG appliance) or the NSG Software Installation (if you purchased only the software and installing on your own hardware.

 

 

 

Return to Documentation Home I Return to Sangoma Support