Presence-Aastra 6739i

Important

Phone Apps are designed to work only with Sangoma IP Phones.

Viewing your Current Status

Upon entering the Presence Application on your phone, you will be shown your currently active status. In our example below, you can see this user's status is set to "Available."

Changing your Current Status

  • In the Presence Application on your phone, you can press the Change button to change your current status.


     

  • The current status has a "*" in front of the text, such as "*Available."


     

  • Scroll down to the status you want to set, and press the Select button. This will change your status to the newly selected status.
     

  • If you chose Away like in our example above, you will see the Presence button is now lit red on your home screen when you exit the Presence Application. This is because you changed to a status in which you are considered to be unavailable. The center message bar will also show "Away."

Changing Your Preferences For When a Status is Active

  • Inside the Presence Application, you can control your preferences for what will happen when you set a status. For each status type you can set:

    • Nothing: The system will not enable DND or Follow Me, and calls will route no differently than if you had no status set.

    • Follow Me: The system will enable your Follow Me until you change to a status that is told to "Do Nothing" or enable "DND".

    • DND: The system will enable your Do Not Disturb until you change to a status that is told to "Do Nothing" or enable "Follow Me".
       

  • Pressing the Prefs button will bring up a list of all statuses, along with the current preference for each status. In our example, you can see that "Away" is told to enable Follow Me, and "DND" is told to enable DND.
     


     

  • Scroll down to the status that you would like to set a preference for and press the Change button. You'll then be presented with 3 options ("Nothing," "Follow Me," and "DND").
     


     

  • Press the Done button when you've made your selection, and your preference will be saved. Now, the next time you toggle to that status, the action you defined will be taken.

Viewing your Current Status

Upon entering the Presence Application on your phone, you will be shown your currently active status. In our example below, you can see this user's status is set to "Available."

Changing your Current Status

  • In the Presence Application on your phone, you can press the Change button to change your current status.


     

  • The current status has a "*" in front of the text, such as "*Available."


     

  • Scroll down to the status you want to set, and press the Select button. This will change your status to the newly selected status.
     

  • If you chose Away like in our example above, you will see the Presence button is now lit red on your home screen when you exit the Presence Application. This is because you changed to a status in which you are considered to be unavailable. The center message bar will also show "Away."

Changing Your Preferences For When a Status is Active

  • Inside the Presence Application, you can control your preferences for what will happen when you set a status. For each status type you can set:

    • Nothing: The system will not enable DND or Follow Me, and calls will route no differently than if you had no status set.

    • Follow Me: The system will enable your Follow Me until you change to a status that is told to "Do Nothing" or enable "DND".

    • DND: The system will enable your Do Not Disturb until you change to a status that is told to "Do Nothing" or enable "Follow Me".
       

  • Pressing the Prefs button will bring up a list of all statuses, along with the current preference for each status. In our example, you can see that "Away" is told to enable Follow Me, and "DND" is told to enable DND.
     


     

  • Scroll down to the status that you would like to set a preference for and press the Change button. You'll then be presented with 3 options ("Nothing," "Follow Me," and "DND").
     


     

  • Press the Done button when you've made your selection, and your preference will be saved. Now, the next time you toggle to that status, the action you defined will be taken.

Return to Documentation Home I Return to Sangoma Support