Setting The Configuration Server for the Sangoma P-Series Phone

You can set the configuration server directly from the phone

Directly from the Phone

1. Press the More button.

   Open

   

    

2. Press the Menu button

   Open

   

    

3. Use the arrow buttons to select Reconfigure.  

    

4. Select Yes to confirm

    

    

5. Choose the Configuration Server 

    

6. Select Sangoma Configuration Server 

    

7. Select OK to confirm

    

8. Click submit

    

    

If you are using HTTP for the mode you will need to set the Port Number that your PBX is setup to listen on for HTTP provisioning as shown in the Global Settings section of End Point Manager.

Example would be http://10.10.48.2:84 with 84 being the Port Number

Important: If you have enabled HTTP/HTTPS/FTP provisioning with authentication at System Admin (PRO), please refer to this wiki for the proper format of the URL string.