Feature Codes
- Nathaniel Halbrooks
The FAXStation CPE device has several functions available via the use of "star codes". They are:
Â
Code | Description |
*411 | Send a fax to this number, and the CPE will return your page to you. If you dial this number without sending a fax, a test page will be returned to you. |
*4357 (*HELP) | Reads back the current IP address of the device |
*638 (*NET) | This allows you to change the network configuration of a device if it is incorrectly configured, and is unable to be reached through the network. |
*23636 (*ADMIN) | This sets the Admin password to a random number, and reads it back to you. |
*999 | This does a complete factory reset on your device. This sets the network settings to be DHCP and removes any pending faxes that may be queued for delivery. |
Â
Please note, these functions are only available on Rev 3 and Rev 4 devices as all prior gen devices are considered End of Life (EOL). If you have a Rev 2 device, there are some feature codes available as well, but their use is not supported, and they only work on port 1 of the device.
Â
Code | Description |
**4636 (**INFO) | Generate an info page and fax it back to port 1 |
**63873738 (**NETRESET) | Resets network stack back to defaults (DHCP, routed mode with LAN/WAN) |
**732668 (**REBOOT) | Reboots the CPE device |
**50 | Resets network stack to routed mode (DHCP client on WAN, DHCP server on LAN) |
**51 | Resets network stack to bridged mode (DHCP client on WAN) |
Â