Writing ISO to a USB Drive

Windows

1. Download the ISO file from SBC Downloads for the version you wish to install. 

2. Download Rufus from https://rufus.akeo.ie/ which is an application to create bootable USB drives.  

3. Open Rufus and then click on the picture of a CD in the bottom right corner as highlighted below. 
   
   
   

   Open

   

4. Select the NSC ISO file. Then change the format type to "DD Image" as shown below in the attached picture. 
   
   
   

   Open

   

5. Once this is done then click Start to make the image. 

6. At this point connect the USB drive to the appliance. During boot up go into the BIOS and verify the USB drive is the first in the boot sequence.