SBC Upgrade

First Create a Backup

Refer to SBC Backup

!You must backup your configuration before upgrade process or you will Lose current config.

Download Update from Sangoma

Download the most recent upgrade package from the SBC Downloads page

• Go to Help -> Update, then click Upload.

Open

Upload Update

• Click Choose File, then browse for the package you downloaded in step #1.

• Then click Upload to begin the update.

Open

The system will load the package.

Install Update

Once loaded click Install to perform the upgrade. 

• Then on the next screen click Ok to confirm the update.

Restart

After the upgrade is done, you will be prompted to Restart the system.

• Click Restart to restart the SBC.

• This step will reboot the server.

Verify Upgrade

Once the system comes back online, after the reboot.
Verify the version of NSC by navigating to Help -> About

Upgrade Cleanup

*Once the upgrade is completed it is recommend to delete the upgrade package file from the system.

Go to Help -> System -> Update then click Delete on the applied package.