Session Border Controller

POWER OFF

In case if you want to power off the system which can be again be executed either from UI or from CLI

1.From UI

2.From CLI

Navigate the mouse to the right side corner as shown below, in that it will give 2 option

1.Restart

2.Poweroff

Once you click on the power off then you will get a Popup as shown below

After some time the system will be powered off.

If you want to power off from CLI then execute the command as shown below

After some time you could see the system will be totally powered off, then you can remove the power cable from the system

Note : Make sure you are not removing the power cable when system is live