SBC Power Off

POWER OFF:

        In case if you want to power off the system which can be again be executed either from UI or from CLI

         1.From UI

          2.From CLI

    Navigate the mouse to the right side corner as shown below, in that it will give 2 option

FROM UI

1.Restart

2.Poweroff

Open

 Once you click on the power off then you will get a Popup as shown below

Open

 After some time the system will be powered off

FROM CLI

If you want to power off from CLI then execute the command as shown below

After some time you could see the system will be totally powered off, then you can remove the power cable from the system

Note : Make sure you are not removing the power cable when system is live