/
Session Border Controller - Initial WebGUI connection

Session Border Controller - Initial WebGUI connection

Owned by Nathaniel Halbrooks
Last updated: Jan 15, 2025 by Kelli Higdon
1 min read

SBC factory settings:  Primary Ethernet port 0 is set to a static IP address. Proceed to connect to the SBC Appliance via Laptop’s web browser.

  • Connect the Primary Signaling Port 0  to a LAN Switch

  • Connect Laptop to LAN Switch

  • Configure Laptop to IP address: 192.168.168.254/24

  • Using Laptop web browser goto URL:

    • http://192.168.168.2
      or

    • https://192.168.168.2

  • Login via

    • Username: root, Password: sangoma

SBC WebGUI Login Screen

 

Default Credentials

  • Username: root

  • Password:sangoma

 

Make sure to change the default password right away. Change Password Section

 

SBC WebGUI Initial Status

On the very first login, the WebGUI will provide you an overview of Sangoma SBC configuration status.

 

The top of the WebGUI screen contains Information dialogs that are used to provide important messages to the user.
At a quick glance we can see that the SBC is 

  • Not started

  • And that Configuration is not complete

 

Below the Information Dialogs, the Configuration Checklist indicates what are the minimum configuration steps necessary to get the SBC running.

 

Return to Documentation Home I Return to Sangoma Support